keengunNic
Member

387 Likes

Page 8 of 26 First 12345678910111213141516171819202122 ... Last

• Jump to page:

1. 
   keengunNic liked post by saum7 On thread : 7mm SAUM Loads

   Im running 168 LRABs 60gr RL19 2830fps in a 20" barrel long action tikka

   Liked On: 05-05-2022, 08:46 PM

2. 
   keengunNic liked post by stagstalker On thread : My Rem 700 7mm SAUM

   I have been wanting one of these for a while now. Many of you will know I'm all about a short handy rifle that can still stretch the legs a bit for hunting. The whole idea of the SAUM for me over my...

   Liked On: 05-05-2022, 07:47 AM

3. 
   keengunNic liked post by GWH On thread : 7mm SAUM Loads

   Before using re26 i use to use 67.5 gr of 2217 with 162 Amax. It was compressed at the OAL i ran and i got over dealing with inconsistent OAL issues, my 63gr of re26 isnt compressed, gives more...

   Liked On: 05-05-2022, 07:25 AM

4. 
   keengunNic liked post by Gkp On thread : 7mm SAUM Loads

   I use rl22 with good results. Keen to try Rl26 and superformance with the 168 lrab as the rl22 is well compacted at 54.5g Mine shot very well with the 143 hammer and superformance. -shreds one...

   Liked On: 05-05-2022, 07:25 AM

5. 
   keengunNic liked post by Shearhuntfish On thread : First time sika

   About a month ago a mate of mine invited me to hunt the kaimanawas for sika with him and a couple of mate. I've only recently moved up from Canterbury and have been hoping to go for my first elusive...

   Liked On: 03-05-2022, 06:56 PM

6. 
   keengunNic liked post by Cyclops On thread : I encourage you to give Club Target Shooting a go

   Most target shooting clubs welcome visitors and will help the visitor with their shooting. For NRANZ affiliated clubs there a hunter class which generally accommodates the hunting rifle. ...

   Liked On: 03-05-2022, 06:52 PM

7. 
   keengunNic liked post by 6x47 On thread : I encourage you to give Club Target Shooting a go

   Yep, GWH far from disgraced himself with the ole' Crudmore :) He does however need to experience 1000yds when the wind gets up.. For those that haven't seen electronic targets in action, it's...

   Liked On: 03-05-2022, 06:50 PM

8. 
   keengunNic liked post by Maca49 On thread : How to bend 40mm copper pipe 180° ?

   You can fill it with sand and heat and bend, or use a plumbers spring if yo can find one of that diameter

   Liked On: 01-05-2022, 08:35 PM

9. 
   keengunNic liked post by Magnetite On thread : "Best" Digital scales around

   If precision is your shtik, magnet force restoration scales.

   Liked On: 30-04-2022, 10:08 AM

10. 
    keengunNic liked post by grandpamac On thread : Lapua 308 brass resizing to 260

    Sorry but this is not true. To my knowledge all of the .308 family of cartridges have a length to shoulder of 1.56" (39.62mm). The length to the base of the neck differs due to changes in diameter. A...

    Liked On: 28-04-2022, 06:30 PM

11. 
    keengunNic liked post by veitnamcam On thread : Lapua 308 brass resizing to 260

    Sell the 308 brass and buy 6.5mm projectiles

    Liked On: 28-04-2022, 06:29 PM

12. 
    keengunNic liked post by dannyb On thread : WTB 300WSM Norma Cases & 6.5x284 Lapua Cases Can Swap powder and/or Projectile

    If only they did 300wsm and it was available in NZ :oh noes:

    Liked On: 28-04-2022, 05:59 PM

13. 
    keengunNic liked post by Pommy On thread : 300WSM loading options (homework)

    2225 is too slow burning for 300wsm. Especially with 160-180 grain bullets. I had a long barrelled jobbie and seated out to nearly 3.200" inches, I could just about get enough 2217 in the case to...

    Liked On: 18-04-2022, 05:05 PM

14. 
    keengunNic liked post by chainsaw On thread : Spend money on a spotting scope or buy a scope with higher magnification?

    If you don’t already have good binos then that’s definitely the best investment. These are invaluable when hunting and spotting game. After that consider good scope like a 2or3-12 or 3-15 or 18. You...

    Liked On: 17-04-2022, 09:50 AM

15. 
    keengunNic liked post by Pommy On thread : 300wm combos

    They all "work" but have a look what powders give the top speeds according to ADI, for the bullet that you want to use. The ideal one for me would be the one that has the biggest max charge without...

    Liked On: 11-04-2022, 04:12 PM

Page 8 of 26 First 12345678910111213141516171819202122 ... Last

• Jump to page: