kiwi-adam
Member

343 Likes

Page 12 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page:

1. 
   kiwi-adam liked post by GWH On thread : 6.5 Grendel Reloading - AR2208 / IMR4064

   Yep, you should be fine to start at 26.5 gr for each, according to QL the pressure should be low enough for a nice safe starting load.

   Liked On: 19-11-2020, 12:48 PM

2. 
   kiwi-adam liked post by Wingman On thread : .17 Mach IV Barrel

   Decided to lighten this varmint rig up considerably by ditching the Laminate stock and fitting it up in my custom chassis. Thinned the barrel down a bit and carbon sleeved it. It has a much better...

   Liked On: 19-11-2020, 07:03 AM

3. 
   kiwi-adam liked post by grandpamac On thread : Powder Use By Date?

   Greetings Kiwi-Adam and Zimmer, A little digging produced the following. First IMR4895 was only marketed by Dupont from about 1962. The markings on your can indicate it was made from the late...

   Liked On: 18-11-2020, 12:44 PM

4. 
   kiwi-adam liked post by Micky Duck On thread : Powder Use By Date?

   yip if it looks ok..smells ok...and goes bang in my rifle sending projectiles into target...its all good for me.

   Liked On: 17-11-2020, 09:21 PM

5. 
   kiwi-adam liked post by zimmer On thread : Powder Use By Date?

   Never ceases to amaze me how many good buggers willing to assist there are on this forum :(

   Liked On: 17-11-2020, 05:09 PM

6. 
   kiwi-adam liked post by grandpamac On thread : Powder Use By Date?

   Greetings Kiwi-Adam, If the AR2208 is in a plastic container, factory marked AR2208 then it is less than 20 years old. If the metal can of IMR 4064 is marked Dupont it is quite old, at least 30...

   Liked On: 17-11-2020, 03:04 PM

7. 
   kiwi-adam liked post by 40mm On thread : Powder Use By Date?

   If in doubt, Ill pick it up on my way through and dispose of it 'safely'

   Liked On: 17-11-2020, 01:19 PM

8. 
   kiwi-adam liked post by Cigar On thread : Powder Use By Date?

   The AR2208 cant be too old because I have a metal tin of it from about 1995! IIRC there was something on the ADI website saying powder will still be okay after 10 years with good storage. As...

   Liked On: 17-11-2020, 01:18 PM

9. 
   kiwi-adam liked post by garyp On thread : Sauer 100 problem

   Worked a treat thanks. All sorted

   Liked On: 12-11-2020, 07:16 PM

10. 
    kiwi-adam liked post by Delphus On thread : First Tahr hunt

    I bought a rifle from a retiring guide last year, and the rifle came with a complimentary guided tahr hunt. I finally took him up on it a this past weekend. He took me into some public land via a...

    Liked On: 09-11-2020, 05:18 PM

11. 
    kiwi-adam liked post by Gibo On thread : Anyone Used Black Watch Reloading Ltd Before?

    Oh shit, i loaded mine up :wtfsmilie::ORLY:

    Liked On: 09-11-2020, 03:14 PM

12. 
    kiwi-adam liked post by 55six On thread : Howa Mini EXCL Lite Chassis

    We cant disclose a price for this chassis yet as its still going through the process of establishing manufacturing costs. However initial indications show that it will be affordable. As soon as we...

    Liked On: 06-11-2020, 10:01 PM

13. 
    kiwi-adam liked post by 55six On thread : Howa Mini EXCL Lite Chassis

    Interest on these is huge with enquiries coming from overseas too. We are still hopeful of a first run being completed around end of year or early next year.

    Liked On: 04-11-2020, 10:18 AM

14. 
    kiwi-adam liked post by Remmodel7 On thread : Howa Mini EXCL Lite Chassis

    152892 This is the stock you need ��

    Liked On: 03-11-2020, 09:27 PM

15. 
    kiwi-adam liked post by 300LRH On thread : Optimal Barrel Time (OBT) - anyone else use it?

    Anyone else here also use Optimal Barrel Time and Quickload with load development? I’ve attached a link for the guys potentially interested in it.Optimal Barrel Time Concept...

    Liked On: 03-11-2020, 09:21 PM

Page 12 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page: