Something based on an ‘08 case would probably be adequate to 500-600yd with ELD-X ammo and the right scope. 6.5CM, 7/08, and 308 are all viable options, with a lot less recoil and barrel-raping than...
Liked On: 26-03-2020, 10:56 PM
Thanks for the offer. unfortunately it is not financially viable for us to invest any more into the chassis system.
Liked On: 16-03-2020, 03:20 PM
At the moment just under a week, but that can change quickly with the roar just around the corner.
Liked On: 11-03-2020, 10:05 PM
Yeah i like mine, i just load for the mag 2.850 is long enough for what i do.the paint on the bottom metal all fell off but other then that shes a beaut.
Liked On: 25-02-2020, 01:05 PM
NZ Fibreglass is a good source of carbon fibre. I used 200gsm plain weave. You need about 1 m for a stock if you do 4 layers of carbon fibre.
Liked On: 24-02-2020, 06:45 PM
FIRST STAGE CARVE THE PLUG Now having only the one stock for a Savage rifle and no easy way to get a replacement if I destroyed it in the process, I made the decision to make a new rifle stock...
Liked On: 24-02-2020, 03:38 PM
131416
Liked On: 24-02-2020, 03:38 PM
A while back I purchased a second hand Savage Model 110 chambered in 30-06. It was and is a perfectly functional rifle and after a bit of load development manged to get shooting well with a diet of...
Liked On: 24-02-2020, 03:38 PM
It is a shame Nick that you guys can’t expand the range for these Hunter chassis. But I totally understand the economics of that, these days. I love mine and wouldn’t swap it for anything. I did...
Liked On: 23-02-2020, 08:56 PM
Hi, Yes bring your rifle and we can suppress it for you. You can talk to Darren about your chassis project then,but I doubt that it will go ahead due to the lack of market (sales) , the high cost...
Liked On: 22-02-2020, 06:24 PM
tardy reply guys. no problem with ar parts. approved by AO. this is the final rifle with a new retractable stock. some details here and there to polish but 95% done. 125928
Liked On: 24-01-2020, 04:10 PM
This guy is in Ohaupo, so he’ll either do tanning or know someone who does. http://www.biggameartistry.co.nz
Liked On: 20-01-2020, 08:44 AM
More than happy to help out! I try to keep the politics out of the place.... just trying to do the kiwi-thing charliehorse to help out This time of the year ...Black Friday etc... there...
Liked On: 07-12-2019, 07:10 AM
Hit up ol' A330 driver, if you pass his GC test he might help you out as far as getting something sent from the "great nation"
Liked On: 06-12-2019, 10:16 PM
CCI subs go well in my CZ.
Liked On: 21-11-2019, 07:26 AM