Went out country to find a spot to shoot at a reasonable distance this arvo. Unfortunately the wind was blowing from 7-12 mph, thems the breaks I guess. Here is a video of Ashlee having a go :) ...
Liked On: 17-05-2013, 04:28 PM
Also on new ones that don't have the calibre/chamber designation engraved on the barrel......
Liked On: 16-05-2013, 09:02 AM
I decided I wanted a very lightweight general purpose hunting rifle that has more grunt than my 6.5wsm, for everything from bush to 6-700 yards. I have successfully shot the 120 GMXs out past 1000...
Liked On: 13-05-2013, 09:42 AM
Not a fair comparision. Even with the same brake your 7mmSTW will always kick less than the 7mmWsm. It is approx 6% heavier & has far more gas volume & gas velocity to make the brake work. ...
Liked On: 13-05-2013, 08:52 AM
If I stuck a T2 Terminator brake on it I could probably fire it one handed :)
Liked On: 12-05-2013, 09:35 PM
Shot a couple of groups today with the T3 Super Varmint 22 Terminator & 80 grain Amax while I was waiting for my 7-375 Ruger to cool off between groups. 9762 9763 9760 With a Litz BC of...
Liked On: 12-05-2013, 08:05 PM
I thought that was Waimea.....
Liked On: 10-05-2013, 02:36 PM
Here is another 7mm-375 built on a 7mm Rem mag Remington SPSS. It weighs 7.6lbs with the VX6 3-18x44 in Talley rings. It has a T2 brake, Stug stock, fluted bolt & barrel, lightweight firing pin,...
Liked On: 28-04-2013, 06:22 PM
One of the "benefits" of a radial brake is the fact that it doesnt matter where it ends up on the rifle muzzle. You chuck a thread on the rifle & screw it on, no need to phase/time it, very simple...
Liked On: 28-04-2013, 04:57 PM
It takes a few firings for the brass to "settle down" & conform properly to the chamber, especially with wildcat fireformed cases. The 1st firing on any new brass is never the best, the 2nd will...
Liked On: 27-04-2013, 09:18 PM
I wanted to build something on the 308 case so decided on the 260 improved. This one is built on a brand new T3 Tikka with a Limbsaver & 23" Vulcan barrel. It has a fluted bolt & barrel. ...
Liked On: 27-04-2013, 08:47 PM
Its got a full length magazine would be bloody stupid not to use it :thumbsup:
Liked On: 27-04-2013, 06:41 PM
Here is another 7mm-375 built on a 7mm Rem mag Remington SPSS. It weighs 7.6lbs with the VX6 3-18x44 in Talley rings. It has a T2 brake, Stug stock, fluted bolt & barrel, lightweight firing pin,...
Liked On: 26-04-2013, 07:41 PM
Here is another 22 Terminator. It happened by accident really, the barrel decided it hurt to much being fluted & tried to escape during one of the last flutes :XD: So it got the flutes profiled...
Liked On: 26-04-2013, 12:09 AM
Here is another 22 Terminator. It happened by accident really, the barrel decided it hurt to much being fluted & tried to escape during one of the last flutes :XD: So it got the flutes profiled...
Liked On: 25-04-2013, 11:59 PM