259653
Liked On: 22-09-2024, 02:35 PM
259653
Liked On: 22-09-2024, 10:57 AM
Does PRC stand for Problematic Rifle Cartridge? It appears every second question here is why won't my PRC shoot.
Liked On: 20-09-2024, 06:36 PM
Does PRC stand for Problematic Rifle Cartridge? It appears every second question here is why won't my PRC shoot.
Liked On: 20-09-2024, 06:21 PM
Did you fall down the side of the hill Bruce?
Liked On: 20-09-2024, 01:16 PM
Does PRC stand for Problematic Rifle Cartridge? It appears every second question here is why won't my PRC shoot.
Liked On: 19-09-2024, 09:15 PM
Does PRC stand for Problematic Rifle Cartridge? It appears every second question here is why won't my PRC shoot.
Liked On: 19-09-2024, 05:57 PM
Does PRC stand for Problematic Rifle Cartridge? It appears every second question here is why won't my PRC shoot.
Liked On: 19-09-2024, 05:17 PM
Been meaning to put something together as Ive had a few requests over the years looking for a chiller for your average joe hunter to keep some venison in. First, to make a little polypanel chiller...
Liked On: 14-09-2024, 10:01 PM
nothing ever is IIRC
Liked On: 08-09-2024, 01:16 AM
God damn that front stud is a PITA. Mine flogged out in the stock so I had to do the same as you have done. The honeycomb in the forend was not centered at the stud so I ended up making a larger...
Liked On: 07-09-2024, 10:33 PM
From a 243AI I was shooting 95g Partitions and 105g A-max. The A-max was a surprisingly good bullet. Having minimal recoil made it a comfortable rifle to use so was often first pick out the safe. I'd...
Liked On: 01-09-2024, 12:03 PM
From a 243AI I was shooting 95g Partitions and 105g A-max. The A-max was a surprisingly good bullet. Having minimal recoil made it a comfortable rifle to use so was often first pick out the safe. I'd...
Liked On: 01-09-2024, 11:24 AM
I went. Mostly 4WD stuff. Not my thing but well represented. I bought a nice little trauma kit for my pack and it was great to meet Matt from MTN Gear.
Liked On: 29-08-2024, 04:39 PM
I have a 308 with similar issue. I backed the load off till it was stupid slow thinking it was too hot but still had the same problem. In the end it was a headspace issue. My chamber is short....
Liked On: 23-08-2024, 11:30 PM