Mix glow powder with clear epoxy or nail polish. If you want some, I have plenty and can send you some.
Liked On: 14-05-2024, 02:00 PM
So where do you guys buy your glow in the dark nail polish ? Could also be good on the fore sight 250237
Liked On: 14-05-2024, 02:00 PM
So what the BP cast lead load is screaming at me is that the nitro load that only half filled the case is very inconsistent and that the BP load which is 105% full is very consistent I had better...
Liked On: 14-05-2024, 01:59 PM
I forgot to mention re the Epoxy Acetone clean all the parts prior to final epoxy fitting Mix about 3 or 4 table spoons worth of it to get it well mixed and accurate. Put plenty on as the liner...
Liked On: 14-05-2024, 01:57 PM
For anyone interested in how this conversion was done here are some missing details on the process I used. There are clearly a lot of little tips and tricks. Just remember when epoxying in a...
Liked On: 14-05-2024, 01:56 PM
You could leave it original... As something different to what you already have The 40-90 tickles my fancy tho... Or the 33wcf...although modernize that and call it an 8.6BP
Liked On: 14-05-2024, 01:47 PM
but yeah you already have .458 barrel so whats inbetween 45lc and 45/70 ???? pretty sure there is a modern handgun round or two. of course the LOGICAL step as you say would be go 45/70 and as for...
Liked On: 14-05-2024, 01:46 PM
With a 2010 era Jimny get the manual not the auto, you will need to work that stick with the M13a motor but the the fuel consumption wasn't that bad. Freewheel hubs made no difference in the scheme...
Liked On: 07-05-2024, 04:59 PM
when they get worn in the tread,I get out the angle grinder and put on cutting disc and add lots of grooves in the treads...keeps me from falling on my arse for a bit longer.
Liked On: 26-04-2024, 07:45 AM
Plus one for selling the A-cat 2-3mm flimsy thing... went and bought a lonely E-cat 6mm that was long-sitting on a salesroom floor - this was even after Jacinda took E cat away... Yep, def can't...
Liked On: 24-04-2024, 05:52 AM
I had the same model switched it between several rifles. It always worked. One feature I liked was that although not "tacticool the turrets were marked off so you could see how many rotations you had...
Liked On: 20-04-2024, 09:03 AM
248082 thats my main knife at the bottom love good knives handmade in Omura Japan by Tanaka San Matsubara blades - my daughter got it for me when she was teaching english there along with the...
Liked On: 16-04-2024, 01:07 PM
Had the philps one, was impressive but small, idwal for 2 people, now got the Sunbeam one, larger easier to clean, rotissary a 1. 5 chicken in had this for 3+ years, buy another in a flash. Briscoes...
Liked On: 05-04-2024, 06:42 AM
Into my 79th year now. I learned to grudgingly accept that I can't burn the candle ay both ends like O ised to. Home projects take precedence and take longer than they uded to, but there is still...
Liked On: 04-04-2024, 05:15 AM
You could mount a scabbard to the bike I've seen ones where the butt is up in the handlebars and the barrel is down by the front axle
Liked On: 01-04-2024, 03:51 PM