I have never had any luck with 150 gr in any of the .303's I have loaded for always got better accuracy with 174 and 180 and the best was 215 gr Norma, Woodleigh still makes the 215 gr go to...
Liked On: 13-03-2023, 01:57 PM
dint call him "motormouth" for no reason. i believe batterymasta is now run by his daughter and son in law
Liked On: 09-03-2023, 02:34 PM
Good info across alot of semis there... you seem well onto it Old School :) Regarding Marlin semiautos - I got a helluva a shock when I bought ($225) and tested a model 60DL on the bench about 15...
Liked On: 05-03-2023, 04:51 PM
If you want something old school . semi , exotic and very accurate then the French Unique is a very cool .22 Also has the ability to be turned into a single shot . Very high build quality and...
Liked On: 05-03-2023, 04:51 PM
I think most jokers working for FS would have taken offence in being labelled a townie.Defineately roll your sleeves up,get shit done, rural types.Fencing,c/saws,blasting,bla bla bla to get an...
Liked On: 04-03-2023, 04:40 PM
I lucked in with a New 10/22 maybe 2 years back, basic stainless Houge stock model. Gundoc did 10 mins of tweaking some small touches . Took it out to a farm to sight in , 3=9 scope . 50 mtrs , 6mm...
Liked On: 03-03-2023, 02:51 PM
Agreed. Ruger a nice wee carbine 22, but later models have dropped off in production quality over the years. We had about 6 and while ok, they were limited by consistent poor accuracy. The best of...
Liked On: 03-03-2023, 02:50 PM
Hey Gents, sorry for the lack of contact, I have been sick on and off for the last few months and have achieved very little in that time. I'm about 50% of the way through the parts for these dies and...
Liked On: 22-02-2023, 11:13 AM
i use a lot of ex military gear for my hunting etc .why -well theres an old saying if a soldier or toddler cant bugger it ,it must be fit for purpose! I also wear ridgeline -why because it suits me...
Liked On: 19-02-2023, 05:14 PM
Yes, I am giving the latest version a really good test. So far I can find no faults. I want to try it with some very dry old hardwood over the weekend, and also some splitting. I will be sending...
Liked On: 10-02-2023, 11:57 AM
Use what they suggest. The glue that holds the rand on comes undone if you use the wrong stuff, I learnt this from experience.
Liked On: 02-02-2023, 01:16 PM
Mind you I still like the 2 stage with lighter spring when rabbiting, if I were keep as single stage I would want to reduce the creep by adding adjustable screw but not about to do that at the...
Liked On: 25-01-2023, 05:17 PM
Apparently there is a gunsmith in the states who has modified the NS522 trigger to adjust the sear position by fitting a small screw in position shown below that adjusts trigger position against the...
Liked On: 10-01-2023, 10:20 AM
Just turned 2 stage actuator over and trying as single stage trigger, a small vee for the spring and a slight radius. Feels nicer than when being 2 stage and the good thing I can always just turn it...
Liked On: 08-01-2023, 02:41 PM
211209 211210
Liked On: 28-11-2022, 09:28 AM