Hi , This week we have a Tikka in 223 into one of our chassis with a magnum over barrel suppressor. Stock and pistol grip were supplied by the customer. 110697 110698
Liked On: 08-05-2019, 12:46 PM
0.050 jump to the lands if loaded to mag length (may be slightly less, but at least 0.035)
Liked On: 08-05-2019, 01:22 AM
Under Mountain Light Wild Jim came down from the hill, came down bent and white, He had spent his life under southern mountain light No more creeks to cross on frozen morning, under a...
Liked On: 05-05-2019, 09:34 PM
I have pretty much finished building my DIY machine, based of Skips design on YouTube. It has cost me about $180 with almost $100 of that being the propane torch and hose. I initially planned on...
Liked On: 05-05-2019, 05:00 PM
The genuine AI steel mags have a reinforcing plate spot welded inside the front of the mag which can be removed with a bit of effort. Gains a couple of mm. Just need to add a bit of plastic to extend...
Liked On: 29-04-2019, 08:27 PM
I went with steel Accurate mags .308 COAL 2.95 max MDT polymer are rated at COAL 2.80 from memory
Liked On: 29-04-2019, 01:54 PM
My MDT polymer mags "grew" over 2mm in width when fully loaded so I'd suggest you give them a big swerve and stay with the metal variety. Have to say that I've found the AICS metal ones to be the...
Liked On: 29-04-2019, 01:54 PM
Was lucky enough to get invited back for another hunt at a Private Forestry block Ive been once before saw a few deer but didn’t get a chance for a shot Ive got a new rifle well 6 months ago now...
Liked On: 09-04-2019, 12:11 PM
Good idea. Most people down hear appear just to wear sun glasses. They will likely save the day too, as they are also plastic "glass". But if you have a misfire, do wait a while before opening the...
Liked On: 10-03-2019, 01:45 AM
I have some Tasco ones I bought years ago. They have yellow lenses, it does seem to improve contrast. I can't remember what they cost but it wouldnt have been a lot, I probably have the box somewhere...
Liked On: 10-03-2019, 01:45 AM
shooternz and @coredite I don’t really agree Loading hot is fine and not only fine but safe as long as you’re not a fucken Idiot Im working really slow and would spot any issues well before i got...
Liked On: 09-03-2019, 04:45 PM
Finally put her together,shot it yesterday,some guns are just a pleasure to shoot 106677106678106679106680106681
Liked On: 08-03-2019, 09:55 PM
The new 7mm Is laying them down, bit of a shout out to cam from alpine precision for the mint job! The boar got it from 695 meters and the others within 30m. Feed the family! 106665 106666 106667...
Liked On: 07-03-2019, 09:14 PM
Pressure signs in cases develop in response to the peak pressure. This typically occurs in time at about one-third of the barrel time - the time between ignition and exit at the muzzle -...
Liked On: 06-03-2019, 08:05 PM
I sight all my rifles at 25, after bore sighting. Draw a 15mm black dot on white paper, fire one shot, and shift scope accordingly. Usually it only takes 2 shots, you can see them easily at 25. Then...
Liked On: 06-03-2019, 03:10 PM