longshot
Member

855 Likes

Page 49 of 57 First ... 3536373839404142434445464748495051525354555657 Last

• Jump to page:

1. 
   Micky Duck liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

   Adjustment of the screw to align the 10 will misalign the zero. If you could adjust it you would be looking for a happy medium where it’s out a bit at both ends and not noticeable (it would be out...

   Liked On: 26-04-2022, 10:53 PM

2. 
   Daniel L liked post by longshot On thread : Loading 7.62x39 subsonic from steel cased factory ammo

   @ Daniel L I load 300 blk, 7.62x39. .44mag and have also loaded 9mm all to subsonic velocities for hunting. I can appreciate your intentions, especially in the current climate of component...

   Liked On: 26-04-2022, 01:30 PM

3. 
   Shadowsol liked post by longshot On thread : Arthur Cleland

   Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...

   Liked On: 26-04-2022, 10:22 AM

4. 
   Bill999 liked post by longshot On thread : Timney Trigger Causing Light Primer Strikes

   Should be someone local who can flick you some of their old primers. Even if you don’t reload you can still deprime and reprime with a hammer a nail and a piece of wood with the right shaped hole...

   Liked On: 26-04-2022, 09:34 AM

5. 
   Synthetic liked post by longshot On thread : Arthur Cleland

   Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...

   Liked On: 26-04-2022, 09:01 AM

6. 
   lau lau liked post by longshot On thread : Arthur Cleland

   Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...

   Liked On: 26-04-2022, 08:45 AM

7. 
   Moa Hunter liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

   Adjustment of the screw to align the 10 will misalign the zero. If you could adjust it you would be looking for a happy medium where it’s out a bit at both ends and not noticeable (it would be out...

   Liked On: 26-04-2022, 08:44 AM

8. 
   Moa Hunter liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

   Snowgrass Ex instrumentation calibrator here and user of both balance beam and electronic scales. The only reason I use electronic scales is because mine are attached to a powder dispenser. ...

   Liked On: 26-04-2022, 08:37 AM

9. 
   Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

   Adjustment of the screw to align the 10 will misalign the zero. If you could adjust it you would be looking for a happy medium where it’s out a bit at both ends and not noticeable (it would be out...

   Liked On: 25-04-2022, 11:26 PM

10. 
    Basenjiboy liked post by longshot On thread : Budget Hunting Binoculars

    Had a look through my mates vortex binos the other day, dont know what model they were but very nice to look through, and probably not too highly priced either. If you are going cheaper, you...

    Liked On: 25-04-2022, 10:57 PM

11. 
    Micky Duck liked post by longshot On thread : Budget Hunting Binoculars

    Had a look through my mates vortex binos the other day, dont know what model they were but very nice to look through, and probably not too highly priced either. If you are going cheaper, you...

    Liked On: 25-04-2022, 10:45 PM

12. 
    Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

    That is an example of inaccurate span that I mentioned earlier. In theory and most likely in practice it won't affect outputs but double weighing will confirm this. Most instrumentation has this...

    Liked On: 25-04-2022, 10:43 PM

13. 
    Micky Duck liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

    That is an example of inaccurate span that I mentioned earlier. In theory and most likely in practice it won't affect outputs but double weighing will confirm this. Most instrumentation has this...

    Liked On: 25-04-2022, 10:30 PM

14. 
    Finnwolf liked post by longshot On thread : Arthur Cleland

    Good gunsmith. First time I met the guy was back in 1998. I had broken the bead off the front sight of a model 94. I rang up and asked if he could fix it and how much would it cost. He said...

    Liked On: 25-04-2022, 09:08 PM

15. 
    Snowgrass liked post by longshot On thread : Frustrating arvo at the range. Powder charges.

    Good move. Do you want to post a photo showing how the fixed zero doesn't line up with the zero on the screw weight?. Not sure that I can offer any advice there but I would like to understand it...

    Liked On: 25-04-2022, 09:04 PM

Page 49 of 57 First ... 3536373839404142434445464748495051525354555657 Last

• Jump to page: