m101a1
Member

388 Likes

Page 6 of 26 First 1234567891011121314151617181920 ... Last

• Jump to page:

1. 
   m101a1 liked post by Barry the hunter On thread : Clarify - 'Hunting areas' vs Public Conservation Land

   yes our old mate gimp here sums it all up pretty well- some DOC administered land is a no go for hunting - but do some research and see why if to you it seems it should be open for hunting - there...

   Liked On: 09-12-2023, 01:38 PM

2. 
   m101a1 liked post by Puffin On thread : Barrel reprofile

   Yes, interested in this too, taking a medium Palma down to something more "sporting", No.3 or 4. Din Collings was the one wasn't he — used to start out with all those Douglas straight blanks...

   Liked On: 09-12-2023, 10:01 AM

3. 
   m101a1 liked post by grandpamac On thread : Reloading Range Brass

   Vertical stringing is where the group is much taller than it is wide, often but not always caused by variations in velocity. Horizontal stringing can be due to wind. GPM.

   Liked On: 26-11-2023, 09:01 PM

4. 
   m101a1 liked post by woods223 On thread : Reloading Range Brass

   Been reloading rifle cartridges for about 43 years. Like others have never annealed a case. Have had the odd split neck over the years but have experienced this with brand new factory ammo a few...

   Liked On: 26-11-2023, 10:14 AM

5. 
   m101a1 liked post by Got-ya On thread : Boat Trailer Maintenance Time

   I'm a big fan of bearing buddies. I only fill them till I see the spring move, a little often is the secret.

   Liked On: 23-11-2023, 08:22 PM

6. 
   m101a1 liked post by Pommy On thread : Projectile recommendations for .223

   Whatever you can get that is cheap. They are indeed all much of a muchness and you won't be able to tell the difference between a Hornady, a Speer, a Nosler, or a Sierra.

   Liked On: 23-11-2023, 12:13 PM

7. 
   m101a1 liked post by Rushy On thread : Auckland shooting club. Resource consent help

   I followed the link but it isn’t open until this Friday. My submission will simply say “Just let Raymond and Victoria build the world class shooting facility that they envisioned when they first...

   Liked On: 22-11-2023, 08:29 PM

8. 
   m101a1 liked post by blip On thread : Boat Trailer Maintenance Time

   A guy I know carries a spare hub with bearings seal and nut washer and split pin as well as a spare when ever hes going for some distance with his trailer. Seems like a good idea..

   Liked On: 21-11-2023, 09:52 PM

9. 
   m101a1 liked post by flock On thread : Priming Tool

   Lee auto bench priming tool

   Liked On: 19-11-2023, 08:47 PM

10. 
    m101a1 liked post by dvk-kp On thread : 4x4 accessories

    https://www.bunnings.co.nz/bahco-94-piece-1-4-1-2-combi-socket-set_p0679433 These are the shit, can do most mechanical stuff with it, I have a set of pliers too.

    Liked On: 17-11-2023, 07:17 PM

11. 
    m101a1 liked post by johnd On thread : Beginner reloader setup

    Just a thought on measuring devices such as verniers and scales, you will pay a premium price for any tool that is related to reloading companies. The same device without the name association will...

    Liked On: 17-11-2023, 04:43 PM

12. 
    m101a1 liked post by zimmer On thread : Beginner reloader setup

    In 57 years of handloading I have only ever had a one case stuck in a die. That was after 9-11 when aerosols and anything solvent based couldn't be shipped. I foolishly tried a water based spray...

    Liked On: 17-11-2023, 11:40 AM

13. 
    m101a1 liked post by Oldbloke On thread : Beginner reloader setup

    Yeh, all you need is RGB Lee dies. Lube, there is more BS in forums about lube than a cattle yard. Gear box oil, used it for years. Currently coco nut oil for 30.06 and 223. Works fine for FLSing....

    Liked On: 17-11-2023, 09:22 AM

14. 
    m101a1 liked post by Andygr On thread : Beginner reloader setup

    One thing I'd add to your list is a stuck case removal tool. :thumbsup:

    Liked On: 16-11-2023, 10:35 PM

15. 
    m101a1 liked post by Oldbloke On thread : Beginner reloader setup

    Agree. Any half decent dial caliper. Mine come from ebay. Beam balance is best, also consider Redding, im happy with mine. You can do without a trickler initially, just half fill a cartridge with...

    Liked On: 16-11-2023, 08:20 PM

Page 6 of 26 First 1234567891011121314151617181920 ... Last

• Jump to page: