Magnetite
Member

125 Likes

Page 6 of 9 First 123456789 Last

• Jump to page:

1. 
   Jhon liked post by Magnetite On thread : Hdy 129g SST in 6.5x55 Swede

   I use the deep creek method for finding the lands. 1. Strip down your bolt (firing pin, extractor. Everything that will put pressure on the case). 2. Find a sized case where the bolt drops freely...

   Liked On: 24-08-2021, 07:56 PM

2. 
   Jhon liked post by Magnetite On thread : 6.5x55 SE Sanity Check

   I don't mind at all. Hopefully I have been clear enough (In my first post I mentioned it's over max and again when I posted over max data). When venturing past max, my new approach is to cross...

   Liked On: 23-08-2021, 10:25 PM

3. 
   rewa liked post by Magnetite On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   It maybe, but It has an SD of zero. That’s unheard of consistency.

   Liked On: 23-08-2021, 09:52 PM

4. 
   rewa liked post by Magnetite On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   Everyone seems to think 2209 is the go to ADI powder for sub 140gr projectiles in the 6.5x55. 2213SC worked really well for the 129gr Interlock. The siren of accuracy was calling, so I thought why...

   Liked On: 23-08-2021, 09:51 PM

5. 
   rewa liked post by Magnetite On thread : 6.5x55 SE Sanity Check

   I got round to some accuracy testing and was surprised at the results. Both were 6 shot groups at 100m. I played around with the seating depth for both powders but settled on using the same for each....

   Liked On: 23-08-2021, 09:46 PM

6. 
   jakewire liked post by Magnetite On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   It maybe, but It has an SD of zero. That’s unheard of consistency.

   Liked On: 23-08-2021, 02:19 PM

7. 
   Tahr liked post by Magnetite On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   It maybe, but It has an SD of zero. That’s unheard of consistency.

   Liked On: 22-08-2021, 10:47 PM

8. 
   Micky Duck liked post by Magnetite On thread : 6.5x55: 2213SC is too slow for 120gr, I say BAH!

   Everyone seems to think 2209 is the go to ADI powder for sub 140gr projectiles in the 6.5x55. 2213SC worked really well for the 129gr Interlock. The siren of accuracy was calling, so I thought why...

   Liked On: 22-08-2021, 09:29 PM

9. 
   Morepork liked post by Magnetite On thread : How accurate are your beam scales?

   I think all the zeros got to me. I've looked at the numbers again and the beam scale is ±0.0021g or ±0.015gr. In which case is perfectly adequate.

   Liked On: 15-08-2021, 02:53 AM

10. 
    Cordite liked post by Magnetite On thread : How accurate are your beam scales?

    I borrowed some old lab scales. 175018

    Liked On: 14-08-2021, 08:28 PM

11. 
    Marty Henry liked post by Magnetite On thread : How accurate are your beam scales?

    I don't have any. However having both scales read that closely gives me some confidence in the readings.

    Liked On: 14-08-2021, 06:39 PM

12. 
    ebf liked post by Magnetite On thread : How accurate are your beam scales?

    I borrowed some old lab scales. 175018

    Liked On: 14-08-2021, 06:30 PM

13. 
    Kiwi Sapper liked post by Magnetite On thread : How accurate are your beam scales?

    I borrowed some old lab scales. 175018

    Liked On: 14-08-2021, 06:20 PM

14. 
    Jhon liked post by Magnetite On thread : Dial Caliper recommendations?

    If you're on a budget keep an eye out for some second hand Mitutoyo dial calipers. Then find a friend or machine shop with some gauge blocks to verify their accuracy. I did and couldn't be happier.

    Liked On: 14-08-2021, 04:37 PM

15. 
    kiwi303 liked post by Magnetite On thread : Reloading and humidity

    I saw it a while ago and got paranoid . Now all my powder lives in a sealed container with a desiccant (moisture removal egg). Primers too, in a separate location.

    Liked On: 09-08-2021, 09:36 AM

Page 6 of 9 First 123456789 Last

• Jump to page: