makka
Member

569 Likes

Page 6 of 38 First 1234567891011121314151617181920 ... Last

• Jump to page:

1. 
   makka liked post by akaroa1 On thread : Sand Casting. Who's done / doing it ?

   Well I needed two lefts and two rights. So four of these And I needed a Whitworth hammer copied for another percussion rifle project. So I just asked them to cast me 2 left, 2 right and 2...

   Liked On: 07-02-2025, 09:39 PM

2. 
   makka liked post by Lazza On thread : 5.6x57 single shot project

   What a great thread! Really enjoyed reading it and you are a very clever bloke. Wish I had half your skills.

   Liked On: 06-02-2025, 08:41 AM

3. 
   makka liked post by Roarless20 On thread : Lockdown light weight carbon wrap stock build - Here we go

   I had a crack at a Epoxy coated Paulownia stock. (blank from Scott). It has aluminium pillars and full length epoxy bedding (jb weld). I've made it for dad's Tikka M55 6.5CM to make it lighter to...

   Liked On: 06-02-2025, 08:40 AM

4. 
   makka liked post by Mrfants On thread : Good sort helped out - TVM Delphus

   Just wanted to post my thanks to Delphus for being a stand up guy and assisiting me with transporting some gear for me. He went out of his way to do a North island pickup and dropoff to me in...

   Liked On: 04-02-2025, 02:55 PM

5. 
   makka liked post by 7mmwsm On thread : Fishing Comp

   267688

   Liked On: 03-02-2025, 02:50 PM

6. 
   makka liked post by trooper90 On thread : 5.6x57 single shot project

   You are a very talented man well done

   Liked On: 29-01-2025, 02:05 PM

7. 
   makka liked post by Friwi On thread : 5.6x57 single shot project

   Are you going to do the checkering on the grip ?

   Liked On: 29-01-2025, 02:05 PM

8. 
   makka liked post by yerimaginaryM8 On thread : Where to buy heavy fluorocarbon 150lb-200lb?

   Read this article and (fishing.net.nz/fishing-advice/how-to/bluefin-tuna-tactics/) and thought it wouldn't hurt to rig 3 or so up with fluoro. Did note the article was produced by Yehaa tackle who...

   Liked On: 28-01-2025, 01:21 PM

9. 
   makka liked post by Springy On thread : 223 on deer

   First deer with the 223. Blue bin for reference. Only a tiny one. Red orphaned fawn. Still a good learning experience for the kids in shooting and guiding someone in across a valley on walkie...

   Liked On: 27-01-2025, 11:21 PM

10. 
    makka liked post by Tahr On thread : 223 on deer

    Im using them in a 1:9. Velocity 2,950 and they perform excellently. Very accurate and kill well. Your high velocity might pull their penetration back a bit but I wouldn't have any concerns. Let me...

    Liked On: 27-01-2025, 11:18 PM

11. 
    makka liked post by craigc On thread : Help interpreting DOC speak on the website

    The statements about numbers are very out of date. DOC staff are very helpful and knowledgeable, once I’ve decided where I’m going to hunt, I contact the local office and talk to someone about the...

    Liked On: 27-01-2025, 01:06 PM

12. 
    makka liked post by Jt89 On thread : Bullet Choice on Hares

    Ahhh, the old adage comes to mind "There's no limit on how gently you can swing a bigger hammer, but sooner or later you can never hit hard enough with a small one!"

    Liked On: 27-01-2025, 11:13 AM

13. 
    makka liked post by Tahr On thread : 223 on deer

    70 yards with thermal. Cripes it was hard to get a steady off hand shot. It was dead just near to where it disappeared. https://youtu.be/zPfI1O0KVZc

    Liked On: 27-01-2025, 11:11 AM

14. 
    makka liked post by Tahr On thread : 223 on deer

    Last evening. 292 yds. 74 Targex. https://www.youtube.com/watch?v=LbzNCmAKRgc The range adjusted red aiming dot doesnt show on the screen. It was half way between the cross hair and the...

    Liked On: 27-01-2025, 11:08 AM

15. 
    makka liked post by No.3 On thread : Inflatable boat glue

    The 777 with crosslinker is the way to go, as others have said cleanliness is the thing. While you are at it, inspect all the seams and see what they look like. Any delamination and grab and pull, if...

    Liked On: 26-01-2025, 04:41 PM

Page 6 of 38 First 1234567891011121314151617181920 ... Last

• Jump to page: