Makros
Member

448 Likes

Page 3 of 30 First 1234567891011121314151617 ... Last

• Jump to page:

1. 
   Makros liked post by akaroa1 On thread : Cast Lead Thread ?

   Did some expansion testing today on the 45-60 This is my bullet baffle box 12mm MDF with 25mm gaps A pretty brutal test medium but good to test two different bullets with The solid nose...

   Liked On: 04-08-2024, 06:15 PM

2. 
   Makros liked post by Rushy On thread : Using the firearms register

   That pretty much defines my history with firearms

   Liked On: 22-07-2024, 01:59 PM

3. 
   Makros liked post by dannyb On thread : Real or fake?

   100%

   Liked On: 17-07-2024, 06:13 PM

4. 
   Makros liked post by BillyDixon On thread : Pre '64 Winchester 88 .243 value?

   Interesting. This is one with niche interest. Most people will be baffled by an old off the wall modern lever action, others will think its some kind of Savage. But there will be seven people in...

   Liked On: 12-07-2024, 11:20 AM

5. 
   Makros liked post by Barefoot On thread : Pre '64 Winchester 88 .243 value?

   Sold a post 64 for $700 a few years ago, good condition. Yours is obviously better than that one but don’t see the pre64 situation adding that much more value to it in NZ, so would say $900.

   Liked On: 11-07-2024, 05:52 PM

6. 
   Makros liked post by Barry the hunter On thread : Pre '64 Winchester 88 .243 value?

   that is one very nice old rifle hope it finds the home it deserves value being .243 and not 308 hmmm okay $1000 - $800

   Liked On: 11-07-2024, 05:52 PM

7. 
   Makros liked post by rambo-6mmrem On thread : Black powder - youse bastards coulda warned me!

   It was fucken freezing you have to admit

   Liked On: 10-07-2024, 01:11 PM

8. 
   Makros liked post by gimp On thread : Testing a conventional approach to load development

   From a practical perspective it becomes impractical to assess the difference between loads sensibly, hence my approach that it is best to take the shortest route to find one where you can have high...

   Liked On: 04-07-2024, 02:11 PM

9. 
   Makros liked post by Ground Control On thread : Testing a conventional approach to load development

   After reading through the recent post my memory was triggered about some basic load development I did with my .223 . I looked back through my photos and found this target . If you look at the...

   Liked On: 03-07-2024, 01:01 PM

10. 
    Makros liked post by Cowboy On thread : Hunting with ya kid

    After shooting a few goats my little girl was needing a rifle more her size rather than one of mine so I'd picked her up a 6.5 grendel. She immediately scoped herself with it and thanks to Vietnamcam...

    Liked On: 03-07-2024, 11:28 AM

11. 
    Makros liked post by Lauries Hut On thread : Advice Needed: Choosing Caliber for Open Tops Hunting

    One important piece of advice if your dad goes down the .308 path. If you stop at a cafe, pub, supermarket on your way hunting. Don’t let him start talking about his 308. If there’s woman around,...

    Liked On: 02-07-2024, 10:08 PM

12. 
    Makros liked post by Cowboy On thread : Nice NZ hunting film

    I enjoy his stuff. Just fresh and happy. It's the antithesis to the 'cool guy/we wear sponsors gear' stuff that is frankly painful to watch.

    Liked On: 21-06-2024, 10:47 PM

13. 
    Makros liked post by cambo On thread : bolt pulling out of action

    Worn sear

    Liked On: 15-06-2024, 04:17 PM

14. 
    Makros liked post by Rangidan On thread : Jaw results

    Got the jaw results back from the stag my young fella shoot this roar, he was 9.3 years stocked he was a old boy and makes us feel good about all the young ones we've let go over the years!252320

    Liked On: 10-06-2024, 09:55 PM

15. 
    Makros liked post by Norway On thread : Shoot lightweight rifles

    This one should be relevant, how to get consistency with lightweight rifles. Who wants to lug around a heavy smokepole??? https://www.youtube.com/watch?v=MKCViW-lfus

    Liked On: 04-06-2024, 11:52 PM

Page 3 of 30 First 1234567891011121314151617 ... Last

• Jump to page: