Makros
Member

1223 Likes

Page 67 of 82 First ... 175354555657585960616263646566676869707172737475767778798081 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Makros On thread : Reloading room and equipment upgrade - first step

   Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

   Liked On: 10-07-2022, 10:12 PM

2. 
   Micky Duck liked post by Makros On thread : Reloading room and equipment upgrade - first step

   I'm beginning the process of setting up a reloading room and the first step, I decided, was to set up base plates for all the equipment to increase the foot print of the equipment and provide a rigid...

   Liked On: 10-07-2022, 10:11 PM

3. 
   Mooseman liked post by Makros On thread : Reloading room and equipment upgrade - first step

   Yea not enough room in the workshop for that carry on. Have a spare room inside so it's getting dedicated to reloading and hunting/shooting guff.

   Liked On: 10-07-2022, 08:55 PM

4. 
   johnd liked post by Makros On thread : Reloading room and equipment upgrade - first step

   The blue rail things on top of this bench are exactly this. Not for reloading equipment but work hold down options on bench top to be set in the top. The good thing about this bench is the top...

   Liked On: 10-07-2022, 02:24 PM

5. 
   6x47 liked post by Makros On thread : Reloading room and equipment upgrade - first step

   Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

   Liked On: 10-07-2022, 10:55 AM

6. 
   Marty Henry liked post by Makros On thread : Reloading room and equipment upgrade - first step

   Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

   Liked On: 10-07-2022, 08:45 AM

7. 
   gqhoon liked post by Makros On thread : Reloading room and equipment upgrade - first step

   Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

   Liked On: 10-07-2022, 08:44 AM

8. 
   Moa Hunter liked post by Makros On thread : Reloading room and equipment upgrade - first step

   Not sure I believe in the concept of overkill... Yup didn't find the normal centre punch caused any issues but slow speeds and lots of tool pressure and lube helped the process. I was...

   Liked On: 10-07-2022, 05:52 AM

9. 
   Moa Hunter liked post by Makros On thread : Reloading room and equipment upgrade - first step

   I'm beginning the process of setting up a reloading room and the first step, I decided, was to set up base plates for all the equipment to increase the foot print of the equipment and provide a rigid...

   Liked On: 10-07-2022, 05:51 AM

10. 
    Bobba liked post by Makros On thread : Reloading room and equipment upgrade - first step

    Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

    Liked On: 10-07-2022, 01:04 AM

11. 
    veitnamcam liked post by Makros On thread : Reloading room and equipment upgrade - first step

    Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

    Liked On: 09-07-2022, 10:43 PM

12. 
    Beaker liked post by Makros On thread : Reloading room and equipment upgrade - first step

    Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...

    Liked On: 09-07-2022, 10:30 PM

13. 
    Moutere liked post by Makros On thread : Reloading room and equipment upgrade - first step

    I'm beginning the process of setting up a reloading room and the first step, I decided, was to set up base plates for all the equipment to increase the foot print of the equipment and provide a rigid...

    Liked On: 09-07-2022, 06:00 PM

14. 
    BSA270 liked post by Makros On thread : Subsonic 22 ammo suggestions .

    The American Winchester .22lr ammo is rubbish in comparison to the Aussie (factory closed) made stuff. The 42gr subs from Aussie use to be great. I have had all manner of issues with the American...

    Liked On: 07-07-2022, 10:04 PM

15. 
    Gibo liked post by Makros On thread : Trusted 18650 suppliers?

    Jacob at https://www.piercingthedarkness.co.nz/ one of the forum sponsors. Good guy and good gear.

    Liked On: 07-07-2022, 01:48 PM

Page 67 of 82 First ... 175354555657585960616263646566676869707172737475767778798081 ... Last

• Jump to page: