Marty Henry
Member

2478 Likes

Page 4 of 166 First 12345678910111213141516171854104 ... Last

• Jump to page:

1. 
   Marty Henry liked post by XR500 On thread : Advice on towable log splitter

   We just park the 1000L pod baskets next to the splitter and fill them. each hold a cube, and last two weeks in winter. They stay out in the paddock for 6 months in the sun and wind, then we round...

   Liked On: 09-05-2024, 10:44 AM

2. 
   Marty Henry liked post by Makros On thread : Straight wall nitro cases. Who uses filler and what ?

   When I used to load 45-70 with smokeless I had very low case fill and never used fillers. I did crimp and use magnum primers to try to ensure complete burn though. Velocity variation was terrible...

   Liked On: 08-05-2024, 10:19 AM

3. 
   Marty Henry liked post by MB On thread : Shout out to FSS Precsion/Darren

   Met Darren this morning as he kindly offered to have a look at a suppressor bush and remove some material for me. He didn't charge a penny! Good bloke with a nicely setup workshop. We're not blessed...

   Liked On: 07-05-2024, 01:16 PM

4. 
   Marty Henry liked post by 6x47 On thread : Sighting in / handloads

   At sub-200yds, you can get away with a lot. Very anaemic loads might be up to two inches lower than factory ammo and on a 6" boiler room, it probably doesn't matter. 300+yds would be a different...

   Liked On: 07-05-2024, 10:00 AM

5. 
   Marty Henry liked post by Micky Duck On thread : Beginners guide to choosing shot sizes

   Lead 3-4-5 for bunnies hares possums. #2 for wallabies,geese,peacocks. You already sussed the small sizes but have skipped #6-7-8 all of which see use on pigeons n quail and do work well on bunnies...

   Liked On: 07-05-2024, 09:54 AM

6. 
   Marty Henry liked post by Friwi On thread : Dreams are free - Ideal do it all riflescope for NZ

   The ideal scope would be something like a 2.5 to 10. Or something like the March 1.5 to 15 but with a 30 mm tube in first focal plane instead of 34mm tube. Also if Swarovski could have done their old...

   Liked On: 06-05-2024, 08:51 AM

7. 
   Marty Henry liked post by grandpamac On thread : Suzuki Jimny

   Greetings bigbear, My Jimny is almost 5 years old and averages 5.8 litres per hundred k. It is the later model with the 1,500 cc engine which may help. I don't flog it so that may help as well and...

   Liked On: 05-05-2024, 08:13 PM

8. 
   Marty Henry liked post by samohtxotom On thread : The final hunt - solo night mission 5 deer down

   With just three days left before the private block gets sold, I had been requested by the current landowner to bomb them up, and so out I went on a solo night mission armed with my 7mm rem mag, night...

   Liked On: 05-05-2024, 06:11 PM

9. 
   Marty Henry liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

   Hi all, thought this would be of interest to those still using irons. Done some digging around and found this type of dual setting front sight, allowing the use of either a standard post for...

   Liked On: 04-05-2024, 08:48 AM

10. 
    Marty Henry liked post by Micky Duck On thread : The lightening project

    Yip taking the barrel off definitely will make it lighter��

    Liked On: 03-05-2024, 11:42 AM

11. 
    Marty Henry liked post by 308 On thread : Kiwi caught on CCTV in Broadmeadows Wellington

    Great piece of news By the way, Hugh Shields - when you say there is too much scratching involved with wild pussy! All I can do is note that some guys love the drama..

    Liked On: 02-05-2024, 01:54 PM

12. 
    Marty Henry liked post by Bol Tackshin On thread : Zastava but unbranded

    True - forgot about Interarms. The stock isn't bedded but is rather tight. Not a match rifle, but a very pleasant shooter. The fore-end did tend to pull to the right a bit, so a bit of free-floating...

    Liked On: 01-05-2024, 07:31 PM

13. 
    Marty Henry liked post by Micky Duck On thread : Proper brass base Shotgun ammo

    I know where brother csmiffy is coming from..it was an issue 25-28 years ago with falcon loads..the cheddite brass loads then were different to the fiochhi brass as in the shoulders were sloped not...

    Liked On: 01-05-2024, 03:51 PM

14. 
    Marty Henry liked post by norsk On thread : Sako lovers

    Sako M-28 in 7.62X53R. You can't polish a turd but Sako can rebarrel one.

    Liked On: 01-05-2024, 03:49 PM

15. 
    Marty Henry liked post by bumblefoot On thread : Getting back to living off the land.....

    grandpamac Thank you :) The NW boss is ringing this afternoon with hours etc. Looking like 3 days a week, which is fine

    Liked On: 01-05-2024, 03:34 PM

Page 4 of 166 First 12345678910111213141516171854104 ... Last

• Jump to page: