Made by a friend who surprised me with at the beginning of a hunting trip. He also did the leatherwork. He's one of those clever bastards🙂 Got to use it same day. Feek it's sharp and holds it's edge.
Liked On: 06-01-2024, 03:43 AM
Influencer, effluencer no difference.
Liked On: 05-01-2024, 09:03 PM
Influencer, effluencer no difference.
Liked On: 05-01-2024, 11:38 AM
It's interesting that we are a bit vigilant re bulk powder but perhaps less so with loaded ammunition. Plenty of 80 or so years old mil surplus ammunition keeps appearing and getting used.
Liked On: 04-01-2024, 03:09 PM
And mil dots and a whole lot of other reticles. Range finders have meant that people have mostly forgotten how to do it.
Liked On: 04-01-2024, 02:43 PM
It's interesting that we are a bit vigilant re bulk powder but perhaps less so with loaded ammunition. Plenty of 80 or so years old mil surplus ammunition keeps appearing and getting used.
Liked On: 04-01-2024, 01:18 PM
Practice putting the rifle to your shoulder with eyes closed, then open them and check your alignment with the sights adjust if needed and repeat, repeat, repeat. If using a scope be aware that...
Liked On: 02-01-2024, 08:11 PM
I've never played with reduced loads for jacketed bullets, but have shot a few cast ones. My thoughts are, cast lead either greased or powder coated has a high degree of lubricity (slipperyness) so...
Liked On: 02-01-2024, 10:47 AM
Note these loads are for cast lead not jacketed projectiles! It's such a shame that SR4759 is no longer made.
Liked On: 02-01-2024, 09:45 AM
Interesting I ran that and the grenhall that it's based on and both fail the 220 gr. You have to remember as rotational speed decreases gyroscopic stability does as well and it's common to see a...
Liked On: 01-01-2024, 06:14 PM
Interesting I ran that and the grenhall that it's based on and both fail the 220 gr. You have to remember as rotational speed decreases gyroscopic stability does as well and it's common to see a...
Liked On: 01-01-2024, 05:08 PM
Interesting I ran that and the grenhall that it's based on and both fail the 220 gr. You have to remember as rotational speed decreases gyroscopic stability does as well and it's common to see a...
Liked On: 01-01-2024, 12:34 PM
A friend's Mrs got sick of the shit on top of gates and asked him if he'd remove them. Sure when I get time was the answer. Time passes, he comes in after dark one night there are 6 headless turkeys...
Liked On: 01-01-2024, 10:54 AM
A friend's Mrs got sick of the shit on top of gates and asked him if he'd remove them. Sure when I get time was the answer. Time passes, he comes in after dark one night there are 6 headless turkeys...
Liked On: 01-01-2024, 09:50 AM
200 will stableised in 1:10 so will a big fat 250 gr if you can find any. Why they chose 1:12 as std for the 308 rather than the 1:10 of the 3006 it replaced remains a mystery
Liked On: 01-01-2024, 09:48 AM