Marty Henry
Member

2449 Likes

Page 25 of 164 First ... 111213141516171819202122232425262728293031323334353637383975125 ... Last

• Jump to page:

1. 
   Marty Henry liked post by PadLo On thread : case separation

   Lucky that ear plug was there when you kneadedit........ i'll see myself out...

   Liked On: 08-08-2023, 08:45 PM

2. 
   Marty Henry liked post by kiwijames On thread : recommendations for Goat Rifle

   You'd need one with a large trigger guard or it will have trouble getting a hoof in there.

   Liked On: 08-08-2023, 03:35 PM

3. 
   Marty Henry liked post by Fssprecision On thread : Useing the firearms register

   I am a licensed dealer (Gunsmith), email me some close-up photos and markings (including caliber) and the receiver and bolt and I happy to send you back an email reply stating what it is and my...

   Liked On: 07-08-2023, 03:14 PM

4. 
   Marty Henry liked post by XR500 On thread : Machine Gun Belt permit to own

   Ahh, the Machine gunners version of lego blocks: stand on one in bare feet and you'l know what I mean:o

   Liked On: 07-08-2023, 09:01 AM

5. 
   Marty Henry liked post by Makros On thread : Machine Gun Belt permit to own

   I'm triggered... won't someone think of the children.

   Liked On: 07-08-2023, 09:01 AM

6. 
   Marty Henry liked post by country cuts On thread : Wairoa gun club update

   So it's official we managed to get our ducks in a row and just got our new certificate as a registered shooting club, so we are pretty stoked to be able to have this in our community

   Liked On: 07-08-2023, 08:55 AM

7. 
   Marty Henry liked post by Micky Duck On thread : 000 in 12ga

   really???? have you weighed a single ball???? then work out if you going to get 9 or 12 or 16 balls inside your wad within given weight for a load you do have...the payload TYPE doesnt matter as...

   Liked On: 03-08-2023, 09:44 PM

8. 
   Marty Henry liked post by rambo-6mmrem On thread : Rust Bluing Solution

   Ill pm you tomorrow As akaroa1 says I do have a good recipe and the ingredients to make it Ive had a couple of people ask recently so i might make some more I won’t give the recipe away as it...

   Liked On: 03-08-2023, 09:58 AM

9. 
   Marty Henry liked post by 55six On thread : A Layman's Guide to Thermal

   I thought I would put this guide together to answer common questions about the terms, tech and misconceptions around thermal technology. First step in buying a thermal is to decide what kind of...

   Liked On: 29-07-2023, 08:37 PM

10. 
    Marty Henry liked post by physeptone On thread : Lever guns - What do ya reckon?

    If you don't have a lever gun, you need to buy one. End of discussion. (Calibre is up to you, but I live at the high end of the spectrum, 44 mag, 45-70)

    Liked On: 19-07-2023, 07:41 PM

11. 
    Marty Henry liked post by No.3 On thread : Do subsonics scare rabbits?

    Ha, that reminds me of... The time me mate was heading home on his bike in the sticks out of Napier. Comes around the corner, sees oldmate possum wandering down the side of the road - no time to...

    Liked On: 19-07-2023, 10:16 AM

12. 
    Marty Henry liked post by zimmer On thread : Bore sight Lazer way off when rifle is zeroed

    The next thing to learn is once you have a couple of shots on the target, and if the shots are a wee ways from your aiming mark, position your crosshair on your aiming mark, and without moving the...

    Liked On: 18-07-2023, 06:51 PM

13. 
    Marty Henry liked post by 199p On thread : Bore sight Lazer way off when rifle is zeroed

    The lazers are rubbish bro Good boresight should have you on a4 paper at 100Y edit to add they are only good on sharks in movies

    Liked On: 18-07-2023, 06:49 PM

14. 
    Marty Henry liked post by Ross Nolan On thread : Open Sights

    7x65R under a couple of 12 ga barrels

    Liked On: 18-07-2023, 09:49 AM

15. 
    Marty Henry liked post by AR7 On thread : Making 25 rimfire reloadable brass

    THANKS to Akaroa 1 I was having eject issues in my 25 Long build [using 22 Hornet cases reshaped ] i reached out for some help from a forum member and with his kind wisdom i now have a...

    Liked On: 18-07-2023, 09:45 AM

Page 25 of 164 First ... 111213141516171819202122232425262728293031323334353637383975125 ... Last

• Jump to page: