I had the same model switched it between several rifles. It always worked. One feature I liked was that although not "tacticool the turrets were marked off so you could see how many rotations you had...
Liked On: 07-12-2021, 07:49 AM
Before doing anything official assess it yourself. Using Google Earth measure distances to the nearest dwellings 30 degrees either side of the range centre line. Look at the backstop and see what...
Liked On: 05-12-2021, 03:16 PM
akaroa1 Its your lucky day! There are two .303 no 5 sporting rolling blocks in the ruahine antique arms auction in January if you really want one.
Liked On: 05-12-2021, 01:06 PM
Before doing anything official assess it yourself. Using Google Earth measure distances to the nearest dwellings 30 degrees either side of the range centre line. Look at the backstop and see what...
Liked On: 05-12-2021, 01:02 PM
akaroa1 Its your lucky day! There are two .303 no 5 sporting rolling blocks in the ruahine antique arms auction in January if you really want one.
Liked On: 05-12-2021, 08:53 AM
Hopefully this explains the difference between inboard and outboard clutches Phil_H
Liked On: 04-12-2021, 09:56 AM
Hopefully this explains the difference between inboard and outboard clutches Phil_H
Liked On: 04-12-2021, 09:11 AM
Just had a good clean and sharpen before going back in the mill. Running skip tooth for the first time I must say I'm impressed.
Liked On: 03-12-2021, 10:01 PM
I've got a small outboard clutch oleo Mac that's due for a sharpen if I remember I'll photograph it
Liked On: 03-12-2021, 05:47 PM
Just had a good clean and sharpen before going back in the mill. Running skip tooth for the first time I must say I'm impressed.
Liked On: 03-12-2021, 05:28 PM
Just had a good clean and sharpen before going back in the mill. Running skip tooth for the first time I must say I'm impressed.
Liked On: 03-12-2021, 04:44 PM
Just had a good clean and sharpen before going back in the mill. Running skip tooth for the first time I must say I'm impressed.
Liked On: 03-12-2021, 02:49 PM
Just had a good clean and sharpen before going back in the mill. Running skip tooth for the first time I must say I'm impressed.
Liked On: 03-12-2021, 02:48 PM
Looks like the tree had a bit of revenge.
Liked On: 02-12-2021, 01:26 PM
You can get to the claimed number of scoped guns in if you top and tail, there's nothing wrong with standing some on the muzzle
Liked On: 01-12-2021, 10:11 PM