Marty Henry
Member

4609 Likes

Page 47 of 308 First ... 333435363738394041424344454647484950515253545556575859606197147 ... Last

• Jump to page:

1. 
   Oldbloke liked post by Marty Henry On thread : Powder: How old is too old?

   Stored properly 15 years is no problem, plenty of people use ammunition loaded 50 or more years ago. If it's now obsolete just use it up and then find a near equivalent and start load development...

   Liked On: 14-04-2023, 09:07 PM

2. 
   tetawa liked post by Marty Henry On thread : Powder: How old is too old?

   Stored properly 15 years is no problem, plenty of people use ammunition loaded 50 or more years ago. If it's now obsolete just use it up and then find a near equivalent and start load development...

   Liked On: 13-04-2023, 06:40 PM

3. 
   Ranal liked post by Marty Henry On thread : Powder: How old is too old?

   Stored properly 15 years is no problem, plenty of people use ammunition loaded 50 or more years ago. If it's now obsolete just use it up and then find a near equivalent and start load development...

   Liked On: 13-04-2023, 06:33 PM

4. 
   dannyb liked post by Marty Henry On thread : Powder: How old is too old?

   Stored properly 15 years is no problem, plenty of people use ammunition loaded 50 or more years ago. If it's now obsolete just use it up and then find a near equivalent and start load development...

   Liked On: 13-04-2023, 06:19 PM

5. 
   bumblefoot liked post by Marty Henry On thread : Getting back to living off the land.....

   It's coming round to shanks, neck chops and oxtail season again . Yummy 😋

   Liked On: 12-04-2023, 10:31 PM

6. 
   Old_School liked post by Marty Henry On thread : clay trap, correct way to throw doubles?

   Place one target normally and the other at the front of the throwing arm that should work

   Liked On: 12-04-2023, 07:33 PM

7. 
   Micky Duck liked post by Marty Henry On thread : clay trap, correct way to throw doubles?

   Yes, we gave a couple of old hand cranked traps that work that way. The clip is a bit confusing it probably positions a clay for straight away but might cause breakages with two. Try removing it and...

   Liked On: 10-04-2023, 07:52 PM

8. 
   Micky Duck liked post by Marty Henry On thread : clay trap, correct way to throw doubles?

   Place one target normally and the other at the front of the throwing arm that should work

   Liked On: 10-04-2023, 07:42 PM

9. 
   erniec liked post by Marty Henry On thread : Long time shooter.. virgin reloader looking for advice

   Agree the Lee stuff pushes out excellent ammunition. It might not be as flash looking as other makes but it works. The only thing that's really not up to speed are the scales as their not...

   Liked On: 09-04-2023, 02:14 PM

10. 
    ZQLewis liked post by Marty Henry On thread : Muzzle Velocity Loss Across Different Ammo

    You need either a chrony or a longer range, the box data is for a test barrel typically over 24 inches long and won't be relevant. How far do you intend shooting? 3 inches high at 100 would be a good...

    Liked On: 07-04-2023, 12:34 AM

11. 
    RV1 liked post by Marty Henry On thread : Muzzle Velocity Loss Across Different Ammo

    You need either a chrony or a longer range, the box data is for a test barrel typically over 24 inches long and won't be relevant. How far do you intend shooting? 3 inches high at 100 would be a good...

    Liked On: 06-04-2023, 01:46 PM

12. 
    Micky Duck liked post by Marty Henry On thread : Muzzle Velocity Loss Across Different Ammo

    You need either a chrony or a longer range, the box data is for a test barrel typically over 24 inches long and won't be relevant. How far do you intend shooting? 3 inches high at 100 would be a good...

    Liked On: 04-04-2023, 05:51 PM

13. 
    NAKED_GOOSE liked post by Marty Henry On thread : 308 Subsonic powder alternative to Trailboss

    Unique 8 grains

    Liked On: 04-04-2023, 10:36 AM

14. 
    caberslash liked post by Marty Henry On thread : Powder Scale Options

    A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

    Liked On: 30-03-2023, 10:19 PM

15. 
    Bryan liked post by Marty Henry On thread : Powder Scale Options

    A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

    Liked On: 30-03-2023, 01:50 PM

Page 47 of 308 First ... 333435363738394041424344454647484950515253545556575859606197147 ... Last

• Jump to page: