Mathias
Member

2799 Likes

Page 71 of 187 First ... 215758596061626364656667686970717273747576777879808182838485121171 ... Last

• Jump to page:

1. 
   Doon liked post by Mathias On thread : Powder recommendation 6x45, 85gr bullets

   Doon You raised a good point about CFE223, I had the same issue with the Grendel and 8208 was the fix. I have tried 8208 in my 6x45 but only with the 75gr but found no advantage over H335, so will...

   Liked On: 12-07-2021, 04:25 PM

2. 
   Hunter_Nick liked post by Mathias On thread : Powder recommendation 6x45, 85gr bullets

   Yep Southernman on to it. CFE223 is what I run with the Sierra 85gr HPBT. I tried others but this works well and you'll get a good result without a compressed load. 27.5gr gave me 2800 with a 20"...

   Liked On: 11-07-2021, 04:17 PM

3. 
   Husky1600 liked post by Mathias On thread : BSA rifle ID help

   Its a Monarch 2nd pattern in an original Monarch stock, nothing CF2 about it folks. CF2 has a different rosewood forend shape and accepts a different bottom metal (die cast alloy)

   Liked On: 06-07-2021, 06:04 PM

4. 
   Dama dama liked post by Mathias On thread : BSA rifle ID help

   Its a Monarch 2nd pattern in an original Monarch stock, nothing CF2 about it folks. CF2 has a different rosewood forend shape and accepts a different bottom metal (die cast alloy)

   Liked On: 06-07-2021, 05:05 PM

5. 
   Tahr liked post by Mathias On thread : Ouch

   I found the remains of a chamois kid hooked up like that, horrible way to go.

   Liked On: 24-06-2021, 05:38 PM

6. 
   Gibo liked post by Mathias On thread : Quad speedo glass - repair how?

   The ring is known as a bezel, really need the right tooling to do the job. Parrots in Chch are the experts https://www.eparrott.co.nz/

   Liked On: 16-06-2021, 08:17 AM

7. 
   Micky Duck liked post by Mathias On thread : Stuff that I've learned about deer control

   Well written Flyblown. It takes on hands experience to share that experience....

   Liked On: 24-05-2021, 05:05 PM

8. 
   takbok liked post by Mathias On thread : 6x45 Rem barrel

   I reckon a Remmy 788 or one of the Howa minis would also be good candidates for improvement. Sent from my SM-A530F using Tapatalk

   Liked On: 14-05-2021, 08:40 PM

9. 
   tetawa liked post by Mathias On thread : BSA Hunter help required.

   One thing to consider, you don't want the new spring to become coil bound when the cocking piece is in full rearward position. You could measure the donor spring when coil bound on the CF2 firing pin...

   Liked On: 14-05-2021, 10:06 AM

10. 
    veitnamcam liked post by Mathias On thread : BSA Hunter help required.

    One thing to consider, you don't want the new spring to become coil bound when the cocking piece is in full rearward position. You could measure the donor spring when coil bound on the CF2 firing pin...

    Liked On: 14-05-2021, 09:29 AM

11. 
    Moa Hunter liked post by Mathias On thread : BSA Hunter help required.

    One thing to consider, you don't want the new spring to become coil bound when the cocking piece is in full rearward position. You could measure the donor spring when coil bound on the CF2 firing pin...

    Liked On: 14-05-2021, 09:15 AM

12. 
    Larskramer liked post by Mathias On thread : My sika head - guesstimate on Douglas score/age ?

    163 3/8 DS

    Liked On: 13-05-2021, 11:09 PM

13. 
    matagouri liked post by Mathias On thread : Primers Available @ Reloaders

    Yep. I've got 1000, what about you :D Wanna loan Rob?

    Liked On: 13-05-2021, 09:05 PM

14. 
    7mmsaum liked post by Mathias On thread : Primers Available @ Reloaders

    Yep. I've got 1000, what about you :D Wanna loan Rob?

    Liked On: 13-05-2021, 04:37 PM

15. 
    Tuidog liked post by Mathias On thread : BSA Hunter help required.

    Hugh Bradley years ago had a lot of surplus BSA parts. Might be worth contacting him in Alex maybe? He did the trigger work on my Hunter 257 Ackley, nice job (again years ago)

    Liked On: 12-05-2021, 03:52 PM

Page 71 of 187 First ... 215758596061626364656667686970717273747576777879808182838485121171 ... Last

• Jump to page: