Remove it by tapping out the 1mm roll pin on the side of the bolt. Be carefull not to loose the plunger as it is under pressure from the spring. Clean the plunger, spring and hole. Assemble and...
Liked On: 13-11-2019, 08:18 PM
:melt: :melt: :melt: :melt: :melt: :melt: :melt: :melt: :melt: :melt:
Liked On: 10-11-2019, 10:45 PM
Is this it? 123699
Liked On: 10-11-2019, 09:09 PM
A few weeks back forum good bugger Barefoot told me that he had someone drop out of a planned hunt trip and he asked me if I would like to tag along. I was excited for the opportunity as it has...
Liked On: 10-11-2019, 08:41 PM
Got in a quick loop of the local trail after work on friday night. 123642
Liked On: 10-11-2019, 08:12 PM
i saw this pic and wanted one for my MDT setup 123546 very happy with it for varminting 123547
Liked On: 07-11-2019, 01:28 PM
123359
Liked On: 05-11-2019, 07:50 PM
I had negotiated a long weekend away with workplace and my domestic overseer and the weather forecast was fantastic. Running up to the weekend a non-hunting friend, Lance, had asked if he could tag...
Liked On: 04-11-2019, 05:07 PM
The missus and I are heading south in early December for a few weeks, so she can study alpine plants. Will take either (possibly both) my 6.5x55 Tikka and .223 Howa. Approximate route is: mt lyford,...
Liked On: 04-11-2019, 04:48 PM
My retriever 123245
Liked On: 02-11-2019, 07:28 PM
That chair has been in the family for a long time. I just said to my wife "hey, Les says to make a stock out of the wood in the chair". She said "tell Les, who ever he is, I will make a stock out...
Liked On: 02-11-2019, 07:16 PM
More likely "Hold my beer....Watch this / it's easy" and " Seemed like a good idea at the time...".
Liked On: 02-11-2019, 06:39 PM
You can do anything if you try hard enough And then some people don't even need to try
Liked On: 02-11-2019, 12:12 PM
Leave it alone and just go hunting. It's accurate enough for 99% of hunting situations. Chop the barrel and recrown if you want.
Liked On: 01-11-2019, 07:35 AM
Soldering iron tip held on the top of the screw head just long enough to heat the length of the screw can loosen the glue/loctite.... good luck
Liked On: 31-10-2019, 11:35 AM