It's a 24 inch barrel, speeds were measured with a magnetospeed and a Prochrono on several occasions. If I was shooting sub quarter inch groups I wouldn't care what speed they were doing! :D
Liked On: 06-09-2020, 01:46 PM
You're all too harsh. I've been in touch directly, and they just really need help moving one million dollars out of the country. Sent from my SM-G975F using Tapatalk
Liked On: 05-09-2020, 04:24 PM
T3 8 twist.Old Tok Can with a ss baffle.I strip the can and clean it after every hunt. Anal? Look at the results.
Liked On: 05-09-2020, 04:11 PM
Plug and play groups. Aim. Pull. Bang. Dead. Sierra in this pill are super accurate.
Liked On: 05-09-2020, 04:11 PM
Clean the living shit out of it then get a sample pack of Sierra 165 Gameking hpbt, load em up 44grains 2206H at 70mm OAL measured at the metplat - if it won't shoot sell it quick! That is my datum...
Liked On: 05-09-2020, 04:05 PM
I'm not going to be much help other than .9 of an inch is Deer-OA out to 500m :)
Liked On: 05-09-2020, 04:05 PM
Locktite! I don't know how spell check came up with licktite
Liked On: 05-09-2020, 03:18 PM
Just finished the G2 223 and my 375 Winchester G2 barrel arrived yesterday. So scope mounted Hanger bar made and fitted Fore end made and being oiled now. It's a little fuller and longer because...
Liked On: 05-09-2020, 03:17 PM
G2 .223 project all done Finished the barrel band sling mount Now it carries low and i can push through the bush even bent down and it will not snag 128537 128538 128539
Liked On: 05-09-2020, 03:16 PM
Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...
Liked On: 05-09-2020, 03:16 PM
I just popped the T.C. emblem off the pistol grip cap and bored it out 18mm for the 16mm take down screw diameter which comes through in a slight angle and it comes out through the center of where...
Liked On: 05-09-2020, 03:14 PM
joelhenton I solved the tool less take down problem. Don't take down at the hinge pin Take down at the butt stock bolt. Barrel plus action stay together and are only 40mm longer than barrel...
Liked On: 05-09-2020, 03:13 PM
The other nice thing with the G2 is it sits nicely in the front passengers side of the truck while i was working on a west coast farm recently. Always there and easier to get out. Saw heaps of the...
Liked On: 05-09-2020, 03:12 PM
Left handed cheek piece MSL Classy, lightweight and special
Liked On: 05-09-2020, 03:10 PM
Im sure Hayes and Associates could get you one of these https://www.fair.it/en/products/rifled-bore-shoutguns/kipplauf/k500 123571
Liked On: 05-09-2020, 03:08 PM