Try Mike Collings at collingsguns
Liked On: 25-03-2022, 05:55 PM
Hardy does 30 cal 1:7
Liked On: 25-03-2022, 05:40 PM
FTx325 son sounds like he needs some luck....not sure how lucky we will be but he gets the slot if hes still keen, txt on the way
Liked On: 25-03-2022, 04:11 PM
As Husky said, have copies of all communication. Good luck.
Liked On: 25-03-2022, 03:41 PM
Hi, going Saturday for a stag in a pretty reasonable place. walks prob 1.5 to 2 hours but not steep.(thats to hunting zone) Be there just before first light and maybe 4pm before back at car but...
Liked On: 25-03-2022, 01:22 PM
i will add make sure the chamber length of the steel you use matches the gun and if in any doubt about any part of the game consult a gunsmith
Liked On: 24-03-2022, 07:41 PM
If you’re shooting over water - you must use steel. That’s the first point to hold onto. ‘I did not want to damage my gun barrel’ isn't an adequate defence if you’re caught using lead when you...
Liked On: 24-03-2022, 07:40 PM
It will only damage older shotguns that are not proofed for steel shot. A way to get around this is having the chokes opened up by a gunsmith, along with the forcing cones. Most modern shotguns...
Liked On: 24-03-2022, 07:40 PM
Got a pair of Kimber montanas. 280AI with March 3-24x42 and dpt magnum suppressor, 24” barrel, 3515g. 308 with Leupold 3-9x33 ultralight and hardy gen 4 suppressor with 14” ish barrel, 2765g. ...
Liked On: 24-03-2022, 07:55 AM
Wby MK5 UL. 20in bbl, Swaro 4-12x50 with magnum DPT suppressor = 7.0lbs
Liked On: 23-03-2022, 09:56 PM
Does it matter if it works? Every one of us has different needs - I would hate to climb through the shit I often end up in with a 24" barrel. But I don't shoot more than a couple hundy metres. ...
Liked On: 23-03-2022, 09:10 PM
193099 Mamba hunter in 12C27 stainless. Latest one off the bench and away for the Roar. Different type of finish , more of a satin look. Lime green Juma, stabilized Maple and Black / Purple...
Liked On: 22-03-2022, 12:15 PM
My Savage lightweight is having a makeover. Out with the old 1/9 well worn skinny barrel and in with a 20" Trueflight 1/8 Tikka profile with flutes. Gun Smith (a member here) sent me a pic of the...
Liked On: 21-03-2022, 09:10 PM
193042193043193043193043
Liked On: 21-03-2022, 08:14 PM
I don't believe it has any bearing, my 223s crown is black, every time I take the supressor off after use I wipe it with a rag over my thumb. I think you are more likely to damage the crown...
Liked On: 21-03-2022, 07:26 PM