Get and learn to use a sling, this halves most people's groups. Drill the fundamentals - hold, breathing, trigger pull, follow through. Consistency is key. Get a stupid-high magnification scope and...
Liked On: 09-08-2019, 08:43 AM
Get and learn to use a sling, this halves most people's groups. Drill the fundamentals - hold, breathing, trigger pull, follow through. Consistency is key. Get a stupid-high magnification scope and...
Liked On: 08-08-2019, 11:58 PM
Good yarn man, cheers for sharing. That's a wound alright, bit more than butterfly stitches. Guess you left the stapler at home :XD:
Liked On: 08-08-2019, 11:33 PM
Alternatively shitcan all that and get a 12ga and a fast bike :D
Liked On: 08-08-2019, 10:46 PM
Get and learn to use a sling, this halves most people's groups. Drill the fundamentals - hold, breathing, trigger pull, follow through. Consistency is key. Get a stupid-high magnification scope and...
Liked On: 08-08-2019, 09:52 PM
Get and learn to use a sling, this halves most people's groups. Drill the fundamentals - hold, breathing, trigger pull, follow through. Consistency is key. Get a stupid-high magnification scope and...
Liked On: 08-08-2019, 09:11 PM
teeny tiny little diffs in the back of em. Their rear diffs are same size as a Proper Fourby™ (safari) front. Bet he could slack off the IP and all the injectors and pump it through with diesel...
Liked On: 08-08-2019, 07:49 PM
Has anyone actually achieved anything with/by the government? Asking for a friend.
Liked On: 08-08-2019, 07:11 PM
Alternatively shitcan all that and get a 12ga and a fast bike :D
Liked On: 08-08-2019, 06:19 PM
Has anyone actually achieved anything with/by the government? Asking for a friend.
Liked On: 08-08-2019, 02:54 PM
Better would be to sight it 2-3" high at 100 and know that it'll be 0 at 26 and 250 (example numbers) Of course there's nothing like actually shooting at actual distances to get DOPE for your...
Liked On: 04-08-2019, 07:53 PM
Ask Reloaders in Onehunga, I don't know specificaly about Marlin but they get timney and vq parts etc. But also, engineer can make or modify, though it may be cost prohibitive.
Liked On: 04-08-2019, 03:43 PM
Any Engineer, for that matter. I'm not sure if he's still kicking, but Thomas Rahn in Howick used to take on the odd job. Your friendly local gunshop (SAI, Serious Shooters, H+F, Guncity) should be...
Liked On: 04-08-2019, 12:13 PM
Better would be to sight it 2-3" high at 100 and know that it'll be 0 at 26 and 250 (example numbers) Of course there's nothing like actually shooting at actual distances to get DOPE for your...
Liked On: 03-08-2019, 08:24 PM
If you know who loaded it, and that it was done to spec, it should be fine. Old .303 rifles tend to have eroded throats so overpressure-by-jamming isn't really an issue, it would only be if they'd...
Liked On: 02-08-2019, 11:01 PM