If you think you've seen bad ones, you should try being the poor sod who has to take them out of the box, remove them from the plastic bag containing the rifle and about half a KG of stinky...
Liked On: 07-09-2021, 05:20 PM
I ended up using CRC Black Zinc, I masked the breech end up to the front of the rear sight mount as it was sort of OK. The rest of the barrel had been roughly sanded as mentioned and I sanded it...
Liked On: 07-09-2021, 04:53 PM
In the days when I trapped possums for a living in the mid seventies, early eighties a faithful Mercator with it's Solingen steel blade was the only knife in the game, to sharpen them we used a round...
Liked On: 07-09-2021, 04:41 PM
Best way I have found (but not the only way) is to replace it with a carbon steel blade! I have an Opinel #8, only downside is it can be a bastard to open if not used for a while. I cut some of...
Liked On: 07-09-2021, 03:07 PM
Harumph! The back of the average blade is sharper than a whole lot of ‘journalists’!
Liked On: 05-09-2021, 05:16 PM
177606
Liked On: 05-09-2021, 08:13 AM
but measuring isnt always that simple.... you have the 7.62mm also known as .30 calibre which is .308..... and the .303 which isnt as its usually .312 BECAUSE the barrel is measured from the...
Liked On: 05-09-2021, 07:58 AM
How much money do you at to spend? If you are looking at under $300 my advice would be: -Buy 2nd hand -Buy a well regarded brand -Spend as much money as possible -Get the most basic scope...
Liked On: 04-09-2021, 07:55 PM
Yeah looking to spend under $300
Liked On: 04-09-2021, 07:54 PM
FFS this was done to death...50-60-70 years ago....think it was Matt Grant who set up a wooded box on stand with pencil attached to scribe on paper when box moved...shot box..pencil moved...put but...
Liked On: 04-09-2021, 07:42 PM
Some sort of stagecoach then, with someone riding shotgun? What about Armourguard?
Liked On: 01-09-2021, 05:06 PM
They haven't hijacked anything or edited any posts? This whole threads seems a bit hysterical. Welcome to the internet?
Liked On: 01-09-2021, 07:11 AM
2 tyres, chain, round gong, some concrete. Suspend a round gong inside the farther away tyre. Collect spalled lead with no digging required. Anchoring the tyres with some rebar pegs may be...
Liked On: 27-08-2021, 12:56 PM
Ive been faffing around with a bunch of Lee Enfields of late, returning the best of them to full wood and parting out others etc. Its been a while since I did any work on these old girls and I wanted...
Liked On: 27-08-2021, 09:29 AM
sorry...in previous life I shifted furniture...and that is a "thing" that fellas nearly come to blows over.....we fixed one chap and folded all his blankets into triangles one day...another day we...
Liked On: 26-08-2021, 08:16 AM