mimms2
Banned

1231 Likes

Page 55 of 83 First ... 54142434445464748495051525354555657585960616263646566676869 ... Last

• Jump to page:

1. 
   mimms2 liked post by SixtyTen On thread : How to make a D-type reamer to chamber a barrel

   I made a chamber reamer for .357 sig a couple of days ago, and have made a couple of other chamber reamers and several projectile reamers using this technique. Gundoc has it right, except I tend...

   Liked On: 15-08-2020, 08:17 PM

2. 
   mimms2 liked post by Micky Duck On thread : A Rifle for Almost Everything.

   it sits in cupboard and waits....I dont have access to property to shoot possums ,rabbits are few n far between...place I shoot them its either 50plus yards so .223 gets nod or spookn shoot seeing...

   Liked On: 15-08-2020, 08:14 PM

3. 
   mimms2 liked post by Marty Henry On thread : How Many Rounds A Year ?

   A competitive clay bird shooter could easily use over 3000 per year possibly even double that. I play around at sporting clays and use 6 slabs a year. Small bore shooters when i did it it was a box...

   Liked On: 15-08-2020, 02:42 PM

4. 
   mimms2 liked post by Gusto On thread : Higher quality soft gun bags ?

   I’m really impressed with this one unsure on the price though...

   Liked On: 15-08-2020, 01:27 PM

5. 
   mimms2 liked post by Ben Waimata On thread : .308 vs .300blk

   Is 300blk really that much better than a heavy .223? Looking through some ballistics charts it appears similar energy at anything other than close range... maybe the specific cartridges I looked...

   Liked On: 14-08-2020, 06:58 PM

6. 
   mimms2 liked post by shooternz On thread : .308 vs .300blk

   If you don't hand load then it is the 300BLK subsonic loads for .308 are not readily available unless custom loaded by some one.

   Liked On: 14-08-2020, 11:40 AM

7. 
   mimms2 liked post by ebf On thread : Mill/Drill under $1k, waste of money?

   Yup, waste of money. That is a glorified drill press. not a mill. Look for 2nd hand mills. You want something weighing at least 2 to 3 times that, with a beefy motor and as rigid as possible. ...

   Liked On: 13-08-2020, 08:25 PM

8. 
   mimms2 liked post by gundoc On thread : CNC lathes

   Look around for a good quality lathe (Colchester, Harrison, Graziano, Meuser, etc), second-hand but not more than 40 years old, 50mm spindle bore, 1 metre between centres with both metric and...

   Liked On: 13-08-2020, 11:47 AM

9. 
   mimms2 liked post by Ftx325 On thread : A Rifle for Almost Everything.

   45/70 it is then.... another oldie calibre...

   Liked On: 12-08-2020, 07:50 PM

10. 
    mimms2 liked post by ebf On thread : Why semiautos

    The same guys pretend they are snipers with their bolt action... The style of firearm has nothing to do with being a dickhead :D

    Liked On: 12-08-2020, 03:28 PM

11. 
    mimms2 liked post by mopheadrob On thread : resignation.

    northdude, it has been said before... punctuation = the difference between knowing your shit and knowing you're shit ;)

    Liked On: 11-08-2020, 11:10 PM

12. 
    mimms2 liked post by zarathustra On thread : How many rounds.

    Yeah there's just not enough heat to wear out the bbl in front of the chamber. High velocity yes...but how many grains of powder in that little case 5g? I guess the barrel would outlive most 17hmr...

    Liked On: 11-08-2020, 08:10 PM

13. 
    mimms2 liked post by 199p On thread : How many rounds.

    Soon as the wind hits 5mph

    Liked On: 11-08-2020, 08:10 PM

14. 
    mimms2 liked post by SixtyTen On thread : Taps and dies

    Second this. Prices are good and great quality. Shipping is reasonable and very fast turn around (I usually get stuff the day after I order it in Auckland) I actually made my own tap a little...

    Liked On: 11-08-2020, 07:54 PM

15. 
    mimms2 liked post by Slug On thread : 284 win vs 280ai

    Only have one target, remains as new...my groups are so goddam tight so as all the holes completely disappears. :D

    Liked On: 11-08-2020, 06:52 PM

Page 55 of 83 First ... 54142434445464748495051525354555657585960616263646566676869 ... Last

• Jump to page: