mopheadrob
Member

656 Likes

Page 38 of 44 First ... 242526272829303132333435363738394041424344 Last

• Jump to page:

1. 
   mopheadrob liked post by ChrisW On thread : preferred brass brands

   My preferred brass is not necessarily the best brass. I mostly use Federal or Hornady due to reasonable price, being readily available, and being good enough for what I do. I place a heavy emphasis...

   Liked On: 07-11-2019, 07:11 PM

2. 
   mopheadrob liked post by zimmer On thread : preferred brass brands

   Wot sorta brass survey doesn't have Lapua and nowadays maybe Peterson on it? From the list though - Norma

   Liked On: 07-11-2019, 07:11 PM

3. 
   mopheadrob liked post by Spitfire On thread : preferred brass brands

   Yes, Lapua.

   Liked On: 07-11-2019, 07:11 PM

4. 
   mopheadrob liked post by ebf On thread : preferred brass brands

   You are missing the best brass from your list ! My picks 1) Lapua 2) Norma

   Liked On: 07-11-2019, 07:10 PM

5. 
   mopheadrob liked post by Ingrid 51 On thread : preferred brass brands

   I use Lapua in my Tikka 6.5x55 and Norma or Hornady in my other three 6.5’s. Also found that S&B had some neck tension issues, so have put that to one side.

   Liked On: 07-11-2019, 07:10 PM

6. 
   mopheadrob liked post by Oli1102 On thread : preferred brass brands

   Yeah some brands use harder brass or are manufactured thicker than others. For example Federal because of its softer nature will usually have loose primer pockets with moderate loads within 5 loads...

   Liked On: 07-11-2019, 07:09 PM

7. 
   mopheadrob liked post by Joe_90 On thread : Nephew's first trip

   Caution - Photo heavy story. I made an offer to my siblings that when their kids turn 13 they can come for a visit and do something exciting. Depending on what they like the plan gets tailored...

   Liked On: 21-08-2019, 05:06 PM

8. 
   mopheadrob liked post by Joe_90 On thread : Fallow antler mount - Warning, DIY content

   I tipped over a wee Fallow buck earlier this year and thought "That would look nice on the lounge wall." How hard can it be to do this as cheap as possible... Step one: Find a nice shield image...

   Liked On: 20-08-2019, 02:11 PM

9. 
   mopheadrob liked post by johnd On thread : 270 not liking ELD-X. What should I try?

   Some .270's just dont like heavy projo's i have had 3 and none of them shot 150's very well compared to 130's. As MD said the Nosler partition 150 is a very good killer / performer I have used that...

   Liked On: 19-08-2019, 05:21 PM

10. 
    mopheadrob liked post by Moa Hunter On thread : 270 not liking ELD-X. What should I try?

    Some of the problems are likely operator fault - shooting off a field rest for load development is not ideal. We need to put you on the bench and sandbags at 100. You are welcome anytime, but please...

    Liked On: 19-08-2019, 09:53 AM

11. 
    mopheadrob liked post by Micky Duck On thread : 270 not liking ELD-X. What should I try?

    right ho..you asked so I will answer. first off to qualify...Im a bush hobbit at heart.owned and used a .270 for 30 years seldom shoot past 200yards but have now shot 4 deer at 300-350yards in last...

    Liked On: 17-08-2019, 01:14 AM

12. 
    mopheadrob liked post by Matt2308 On thread : 270 not liking ELD-X. What should I try?

    First step will be to try in smaller increments as you are correct that 1 grain increments are too big and you have probably missed the node. Try .5 at a time and fine tune further in .1 after you...

    Liked On: 17-08-2019, 01:14 AM

13. 
    mopheadrob liked post by Link On thread : 270 not liking ELD-X. What should I try?

    40mm ain't bad at that range. A lot of variables too that have caused me issues in the past trying to find the "perfect" load. Sorry if this sounds patronizing but are you letting the barrel cool...

    Liked On: 17-08-2019, 01:07 AM

14. 
    mopheadrob liked post by 257weatherby On thread : 270 not liking ELD-X. What should I try?

    The 130 Sierra Prohunter is not overly sensitive to seating depth and 60 grains 2213 is nearly sure to be on the money to get around 3100 and moa or better. Cheap, and kilsl proper dead, as does...

    Liked On: 17-08-2019, 01:05 AM

15. 
    mopheadrob liked post by dannyb On thread : 270 not liking ELD-X. What should I try?

    That's supprising, I go up in .5gn increments and my go to 145gn eldx load for 270win is doing 2930fps and easily prints cloverleaf groups all day at 100 yards, I have shot it out to 450 yards on a...

    Liked On: 17-08-2019, 12:54 AM

Page 38 of 44 First ... 242526272829303132333435363738394041424344 Last

• Jump to page: