No rocket science to polishing/improving JWs.. Main thing is to check action for burrs - remove any on bolt and inside receiver. Then get dremel and smooth out machine marks on bottom of bolt as...
Liked On: 08-09-2021, 09:18 AM
No rocket science to polishing/improving JWs.. Main thing is to check action for burrs - remove any on bolt and inside receiver. Then get dremel and smooth out machine marks on bottom of bolt as...
Liked On: 08-09-2021, 09:13 AM
Yep ... in that price category the bolt Marlins really are excellent wee hunters - shoot well and all I've benched were easily sub 0.5" at 50m. Models 925 and 980 good. A little Jw15 chopped to 16"...
Liked On: 08-09-2021, 06:50 AM
We've chopped, recrowned and polished action on about 20 JW15s and I really do rate them as worker 22s - as good as you'll get for the truck/quad. Almost all dropping under 0.5" at best at 50m after...
Liked On: 07-09-2021, 09:47 PM
We've chopped, recrowned and polished action on about 20 JW15s and I really do rate them as worker 22s - as good as you'll get for the truck/quad. Almost all dropping under 0.5" at best at 50m after...
Liked On: 07-09-2021, 09:46 PM
We've chopped, recrowned and polished action on about 20 JW15s and I really do rate them as worker 22s - as good as you'll get for the truck/quad. Almost all dropping under 0.5" at best at 50m after...
Liked On: 07-09-2021, 09:43 PM
We've chopped, recrowned and polished action on about 20 JW15s and I really do rate them as worker 22s - as good as you'll get for the truck/quad. Almost all dropping under 0.5" at best at 50m after...
Liked On: 07-09-2021, 09:40 PM
I use cold blue product - have done couple of dozen rifles with it and it usually comes up well. Did a 70s Toz recently and metalwork looked surprisingly good. From experience there are definite...
Liked On: 07-09-2021, 06:29 PM
Yes trimming barrel is easy. Pop it into vice, measure 16" from receiver (or the length you want), cut off with hacksaw, tidy end with grinder or file/wet and dry etc, then put appropriate size round...
Liked On: 07-09-2021, 03:59 PM
A while back I fine sanded a 22 barrel and used autosol polish to finish it and give it a stainless look. Looked good. Otherwise I get good results with cold blue - but I do it my way..
Liked On: 04-09-2021, 09:36 PM
A while back I fine sanded a 22 barrel and used autosol polish to finish it and give it a stainless look. Looked good. Otherwise I get good results with cold blue - but I do it my way..
Liked On: 04-09-2021, 08:32 PM
Correct me if wrong but I seem to remember in the late 60s and poss early 70s we did not need a firearms licence at all - just a Permit to Procure a firearm. Went to the copshop, got your permit,...
Liked On: 31-08-2021, 10:21 AM
My hunter truck is a 312ks 96 Bighorn with 32 muds, tune etc - can do 9.7L/100 on trip (29.1mpg) but more commonly just over 10L. Much much better than my 1kz 3.0 Prado - that was a shocker on...
Liked On: 29-08-2021, 09:16 AM
Good to know. From umpteen hundred 4wd club trips - Coast to Coast etc - varying tyre pressures crucial to widen traction footprint but also for comfort. We do it all the time. Same (albeit to a...
Liked On: 27-08-2021, 12:25 PM
I like look of that cherokee Chief - fat tyres etc and latest model has solid spoke wheels which would be stronger for uneven terrain. $2.5k last price but not in stock now - seems only Smartpower...
Liked On: 27-08-2021, 12:48 AM