Had a Sako A1 heavy barrel 243 that was a tack hammer 75 amax took rabbits at 500m no worries. Shot it in nra comps BUT down side was barrel life, the 243 eats throats so only expect 1500 rds from it...
Liked On: 20-12-2018, 01:46 PM
I had a CTR in 6.5 Creedmoor, would fit the bill well for what you are looking for. I've replaced it with a more dedicated steel/PRS type rifle. It's on the heavier end of what I'd be wanting to...
Liked On: 20-12-2018, 01:45 PM
He certainly is :)
Liked On: 18-12-2018, 09:26 PM
Nice to hear for a change. Matt at Customs NZ is a good guy to deal with.
Liked On: 18-12-2018, 09:26 PM
Well no, my state of the art cutters are made from T C tipped saw blades and as I`m hand cranking slowly through the barrel with my top of the range C N C set up there`s no wear on the cutter. My...
Liked On: 10-12-2018, 08:48 PM
100235
Liked On: 06-12-2018, 02:40 PM
So last instalment. Iv had the unit for a couple of weeks now. Was well packaged and Dave included the replaced parts., looks like a mother board. I put some rim fire past it the day it arrived...
Liked On: 20-11-2018, 08:53 PM
Bit of an update: My radar has been repaired and should be on its way home shortly. Its taken a while but I made it very clear at the beginning I was in no hurry.The guy Iv been dealing with is the...
Liked On: 20-11-2018, 08:52 PM
Was intended to be an informative thread about a labradar warranty repair, but as with all forums the knitting group gossips have to have a little spotlight.
Liked On: 20-11-2018, 08:52 PM
Sako All Varmint ( classic Old School wood & steel ) . . in time it will be rebarrelled in 6BR . . . thats the plan 98194 couldnt help myself had to load up a few rounds to have a play, had...
Liked On: 14-11-2018, 06:48 PM
30 Arx Leupold vx3 2-8x36 McMillan Stock Dpt can...
Liked On: 14-11-2018, 06:47 PM
A little more midnight oil burnt and I got the Shilen barrel threaded for a suppressor and loaded some more test loads. This time I loaded on once fired brass and use CCI BR-4 primers to see if...
Liked On: 13-11-2018, 02:32 PM
.22TCM Varmint Rifle build The .22 TCM is a cartridge designed to run out of a 1911 pistol magazine and reaches a scorching 2000fps with a 40gr bullet for the 5” barrel. ...
Liked On: 13-11-2018, 02:24 PM
Unfortunately I can't say I own this but I've been lucky to have used it on my last 2 trips. 28Nosler Best of the West action Southfort Labs carbon barrel Southfort Labs stock Huskemaw scope ...
Liked On: 04-11-2018, 12:46 PM
Not a new one but dragged the Kimber 243 out of the safe run a patch through it and shot it at 100m with factory 95grn federal fusion went alright, Ginga old rifle. 97401 97403 Oops target pic...
Liked On: 04-11-2018, 12:46 PM