went out in the weekend to give my rifle a check over, I'd taken a tumble with it last time I was out and wanted to make sure everything was ok before I head out next weeked. set myself up, took a...
Liked On: 14-08-2023, 09:50 PM
try win 748 with them im getting .6 @ 100 with my brothers Howa and im new to reloading and still learning
Liked On: 14-08-2023, 08:30 PM
If they are the hornady btsp mine work ok about .6moa at 100m under 25grn 2206h in adi cases just loaded to Sammi length
Liked On: 14-08-2023, 08:30 PM
zimmer is this what you require? If it is PM me with your details and I’ll send some to you230386 230387
Liked On: 14-08-2023, 04:31 PM
"essence of Romney"...sounds like a Waimate brand of aftershave
Liked On: 14-08-2023, 04:30 PM
Greetings, Hodgdon listed a load for the .308 with the Hornady 190 grain Sub X projectile and 13.3 grains of H4895/ AR2206H for 1,044 fps. I would not try that with a lighter projectile. I used a...
Liked On: 13-08-2023, 06:56 PM
Greetings Again, Cold and windy today (old age pensioners are sensitive to this) so I dug out the article mentioned above which appeared in 1987. The cartridge was the .240 Gibbs. This is the .25-06...
Liked On: 13-08-2023, 06:55 PM
I use 2206, The 308 cases I use were made in Canada by stealthround not sure if they’re still in business. The cases are made out of aluminium, they have small internal volume, the flash hole...
Liked On: 13-08-2023, 06:46 PM
Get a stuff reporter to idenify it for you
Liked On: 13-08-2023, 06:33 PM
1. Assemble rifle without magazine spring fitted (for internal box mags) 2. Hold the rifle vertically with the recoil pad on the bench, and the barrel pointing to 1 o’clock 3. Undo the front action...
Liked On: 13-08-2023, 06:27 PM
Honestly it’s not that hard. It’s a process that takes some time, effort and understanding of what you’re trying to achieve. I read and re-read Fosters book many times. Spent far too much time on...
Liked On: 13-08-2023, 06:20 PM
At $390 you would expect a near perfect pillar bedding. With aluminium Pilars . A couple of small to very small air bubbles under the rifle receiver are acceptable provided the rest of the finish ,...
Liked On: 13-08-2023, 06:17 PM
except if he removes the bedding it will still be the same as it was..the stock hasnt been garked up,scratched,dented...2 minutes with a tiny paintbrush and some craft paint and it will look a...
Liked On: 13-08-2023, 06:14 PM
Had a couple of weeks with fine weather so took the chance to take the grandies 1 week each and set some traps. First week with 8 year old Finn we set 30 traps over 2 nights and got 23 possums. He...
Liked On: 29-07-2023, 06:36 PM
Double on the pine. 229888
Liked On: 29-07-2023, 06:35 PM