No.3
Member

2667 Likes

Page 138 of 178 First ... 3888124125126127128129130131132133134135136137138139140141142143144145146147148149150151152 ... Last

• Jump to page:

1. 
   Kopua Cowboy liked post by No.3 On thread : Caravan storage problem for f/a

   Hmmmm... Can you recess the floor section down between the chassis rails in an area and have a decent thickness steel box with a locking lid that is in itself concealed under the floor coverings? ...

   Liked On: 01-03-2023, 06:04 AM

2. 
   Micky Duck liked post by No.3 On thread : How to lose your NZ Firearms License?

   Yep, was quite surprised to hear it spoken like that - you kind of inevitably hear it bandied about as an urban legend type deal but from an older more grizzled blueliner it's sort of a concern you...

   Liked On: 28-02-2023, 04:26 PM

3. 
   Micky Duck liked post by No.3 On thread : How to lose your NZ Firearms License?

   There's been a couple of cases recently where Police officers did lose their licenses and hence their employment as a result of driving offenses resulting in loss of license. It's not broadcast by...

   Liked On: 28-02-2023, 02:58 PM

4. 
   Micky Duck liked post by No.3 On thread : How to lose your NZ Firearms License?

   Yep. The one thing we need to realise as well is Police by definition are a reactive outfit that specialise in applying their skills after an event, and sorting out what we as society class as...

   Liked On: 28-02-2023, 02:56 PM

5. 
   Micky Duck liked post by No.3 On thread : W.J.JEFFERY - 303

   Any chance of a few close ups of the thing?

   Liked On: 28-02-2023, 02:37 PM

6. 
   Micky Duck liked post by No.3 On thread : show us your chainsaws

   The 046/MS460 is a good size, I have a lot more respect for them after doing the rebuild on the squashed one I got. I like the design more than the 044/MS440 as it doesn't have the sleeve/collar on...

   Liked On: 28-02-2023, 02:24 PM

7. 
   Micky Duck liked post by No.3 On thread : .308 into .243?

   In common calibers it's technically possible, but as others have said unless you are badly short it's not worth it... Also consider the issue of mismatched head stamp, while it's unlikely to get an...

   Liked On: 27-02-2023, 07:39 PM

8. 
   Micky Duck liked post by No.3 On thread : Shooting through stuff.

   The longer the bullet, the less likely to sod off at weird angles is my take from doing this over the years. It's something that just happens in thick bush, can't really avoid it. If you look...

   Liked On: 27-02-2023, 05:47 PM

9. 
   Jhon liked post by No.3 On thread : How to lose your NZ Firearms License?

   Yep. The one thing we need to realise as well is Police by definition are a reactive outfit that specialise in applying their skills after an event, and sorting out what we as society class as...

   Liked On: 27-02-2023, 09:00 AM

10. 
    timattalon liked post by No.3 On thread : carpet on bonnet of trucks

    Get a second bonnet from pick a part or a wrecker. If you're really lucky you'll track one down already carpeted and no worries about the colour...

    Liked On: 25-02-2023, 03:08 PM

11. 
    madjon_ liked post by No.3 On thread : Micro Tig. Could I do it myself ?

    Yeah, good points. That's something I struggle with a bit, I run pretty much one size of everything with a couple of filler wire sizes as it's just easier and make do at the extremes. For a 'hobby'...

    Liked On: 24-02-2023, 05:52 AM

12. 
    rupert liked post by No.3 On thread : Micro Tig. Could I do it myself ?

    Yeah, good points. That's something I struggle with a bit, I run pretty much one size of everything with a couple of filler wire sizes as it's just easier and make do at the extremes. For a 'hobby'...

    Liked On: 23-02-2023, 11:26 PM

13. 
    Tikka7mm08 liked post by No.3 On thread : Micro Tig. Could I do it myself ?

    I'm told if you can use a glue gun or poo up a window you can weld, dunno if that helps (or if it's true haha).

    Liked On: 23-02-2023, 08:54 PM

14. 
    Cordite liked post by No.3 On thread : Micro Tig. Could I do it myself ?

    I'm told if you can use a glue gun or poo up a window you can weld, dunno if that helps (or if it's true haha).

    Liked On: 23-02-2023, 07:36 PM

15. 
    veitnamcam liked post by No.3 On thread : Micro Tig. Could I do it myself ?

    Pulse tig setup, get a unit that does AC/DC is my advice - you may not want to do alloy/aluminium but it has a use for some oddball things like some cast iron brazing and the like. Very useful...

    Liked On: 23-02-2023, 05:50 PM

Page 138 of 178 First ... 3888124125126127128129130131132133134135136137138139140141142143144145146147148149150151152 ... Last

• Jump to page: