No.3
Member

2665 Likes

Page 167 of 178 First ... 67117153154155156157158159160161162163164165166167168169170171172173174175176177178 Last

• Jump to page:

1. 
   Micky Duck liked post by No.3 On thread : Replacing no longer available rifle parts..

   I built one of mine up with the rapidfix superglue and powder kit - fixed the split up the front of the mag but not sure how the feed lips would go with the glue...

   Liked On: 27-08-2022, 09:52 PM

2. 
   Moa Hunter liked post by No.3 On thread : Price points in centrefire hunting scopes

   Really good point, about what we tend to look for. In a bush hunting rifle, I would add slimness and minimum projections off the scope and also cheapness as at the moment it is such a pain in the...

   Liked On: 27-08-2022, 03:00 PM

3. 
   Scouser liked post by No.3 On thread : Machete

   Gerber? Expensive but I'm told they tend to keep their edge OK. Otherwise you could try what the Air Cav did in Vietnam and run a line of det cord down. Not exactly the most neighbour friendly...

   Liked On: 26-08-2022, 09:22 AM

4. 
   Micky Duck liked post by No.3 On thread : Price points in centrefire hunting scopes

   Really good point, about what we tend to look for. In a bush hunting rifle, I would add slimness and minimum projections off the scope and also cheapness as at the moment it is such a pain in the...

   Liked On: 25-08-2022, 07:02 PM

5. 
   Gibo liked post by No.3 On thread : Machete

   Gerber? Expensive but I'm told they tend to keep their edge OK. Otherwise you could try what the Air Cav did in Vietnam and run a line of det cord down. Not exactly the most neighbour friendly...

   Liked On: 25-08-2022, 06:52 PM

6. 
   Tahr liked post by No.3 On thread : Silky saws

   Ahh that looks a little better than the bow saws I have here, same blade tech but those are slightly smaller with a more rigid handle. Mine are more like a cross between the Jack jobbie and what you...

   Liked On: 25-08-2022, 06:17 PM

7. 
   Maxx liked post by No.3 On thread : Silky saws

   F180 is my one for what it's worth... https://silkystore.co.nz/products/f180-with-tabs

   Liked On: 25-08-2022, 12:51 PM

8. 
   Puffin liked post by No.3 On thread : Silky saws

   F180 is my one for what it's worth... https://silkystore.co.nz/products/f180-with-tabs

   Liked On: 25-08-2022, 12:43 AM

9. 
   RV1 liked post by No.3 On thread : Silky saws

   I have a Silky folder, had it for something like 20 years now and on the 2nd blade. I have no idea what the current equivalent model is now but it's a brilliant saw, destroyed the first blade...

   Liked On: 24-08-2022, 03:07 PM

10. 
    RV1 liked post by No.3 On thread : Silky saws

    F180 is my one for what it's worth... https://silkystore.co.nz/products/f180-with-tabs

    Liked On: 24-08-2022, 03:07 PM

11. 
    Ftx325 liked post by No.3 On thread : Silky saws

    F180 is my one for what it's worth... https://silkystore.co.nz/products/f180-with-tabs

    Liked On: 24-08-2022, 10:15 AM

12. 
    Shootm liked post by No.3 On thread : Silky saws

    F180 is my one for what it's worth... https://silkystore.co.nz/products/f180-with-tabs

    Liked On: 23-08-2022, 11:30 PM

13. 
    Micky Duck liked post by No.3 On thread : Silky saws

    I have a Silky folder, had it for something like 20 years now and on the 2nd blade. I have no idea what the current equivalent model is now but it's a brilliant saw, destroyed the first blade...

    Liked On: 23-08-2022, 09:56 PM

14. 
    rewa liked post by No.3 On thread : Quality "everlasting" .410 shells

    Try gasket cork from an engineering outfit, it's more flexible and better for cutting...

    Liked On: 21-08-2022, 02:32 PM

15. 
    timattalon liked post by No.3 On thread : Panelbeater narrowly avoids Armageddon

    Ha didn't find anything on this and chucked the link into the off topic section. I reckon a load of crap, used to open old unwanted shotgun shells with a grinder to recover the lead for sinkers and...

    Liked On: 20-08-2022, 02:27 AM

Page 167 of 178 First ... 67117153154155156157158159160161162163164165166167168169170171172173174175176177178 Last

• Jump to page: