I just have some birdshot in lid of a jar mixed with graphite powder.... I dip case neck in this..it lubes inside and out at same time.
Liked On: 01-06-2024, 08:56 PM
Greetings All, I had a homebuilt 8 x 4 trailer for around 40 years. It had Landrover wheels, hardwood deck and heavy RHS frame and was heavy as. I towed it with a Landrover and later a Navara. It...
Liked On: 31-05-2024, 06:59 PM
Vixen 4-16x. And you will have plenty of change.
Liked On: 31-05-2024, 12:05 PM
Got one,like it,lives in my truck.much like bahco knife.
Liked On: 30-05-2024, 09:51 PM
Bergara TD13 / 16 inch barrel , 1/08 twist Red dot powder 151 cast projectile ( Roberts ) R.P brass Whites primers So started out at 8.5 gr and worked our way down in .5 lots till subsonic ....
Liked On: 26-05-2024, 09:42 PM
Oh yes there is, cubic dollars ;)
Liked On: 26-05-2024, 11:02 AM
Get a dealers plate:D, we A framed a homemade hunting wagon without any rego or WOF for years, mainly in the dark and country roads
Liked On: 26-05-2024, 11:01 AM
For me (and everyone else I've talked to who has completed registration) the issue is that you find one or more firearms they will not accept. And it isn't weird stuff. Gecado Plinker single shot...
Liked On: 25-05-2024, 02:41 PM
The problem is that they are a stationary holding brake, so applying them on the brake rollers doesnt even simulate how they would be used in real life. I have seen trucks roll away with the cardan...
Liked On: 23-05-2024, 03:28 PM
Casually strolls into the conversation when it suits him.....
Liked On: 22-05-2024, 11:50 AM
Do it all the time to brand new vehicles. Mark it out well. Drill holes in the corners. Use an air saw or battery multi tool to cut the bumper. Use as small pinch weld or similar around the cut...
Liked On: 21-05-2024, 05:08 PM
So those of us back in the day with .303's and lots of those cheap cardboard round packets of FMJ's that we dealt to the tips with a flat file were ahead of our time:ORLY::D
Liked On: 21-05-2024, 04:26 PM
Mask it, very small thin wall hole saw in all four corners, then four straight cuts will the jigsaw and a fine tooth blade. Clean it up with a file and a nogaburr. Sent from my iPhone using...
Liked On: 20-05-2024, 08:32 PM
there's fuk all to go wrong with a decent s/h kiwi made trailer, what is there? wheel bearings (a kiwi trailer will probably have decent ones in it anyway) a plug a bit of wiring and a couple of...
Liked On: 20-05-2024, 12:03 AM
Best trailer I’ve ever used is my mates, it’s bloody awesome and I don’t have to store it:D
Liked On: 19-05-2024, 08:18 PM