Mine was non turbo but one of the black top high torque donks. That thing wasn't the crispest on response but stump pulling torque. It was hard on mounts and clutches!
Liked On: 19-01-2024, 08:58 AM
If you went to Repco or Nissan and grabbed a new set of bushes all around and did the engine, body mounts, and steering and suspension dampers you'd get a phenomenal improvement in...
Liked On: 19-01-2024, 08:56 AM
Yeah the auto/manual thing is almost done and dusted - walk onto your average dealers lot and try and find a manual car (actual car, not a ute, SUV or van). They are rare as hens teeth and rocking...
Liked On: 17-01-2024, 02:43 PM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 16-01-2024, 11:16 AM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 15-01-2024, 05:46 PM
Don't do what I did with the first one the damn cat brought in, pinned it to the wall with the diving handspear then got cute with the wife and made her deal with it for me while I tried not to...
Liked On: 13-01-2024, 11:25 PM
If you call them pests feel free to drop them off at mine, I'll assist with disposal... Been doing ok on the f**king rosellas this year so far, knocked off a breeding pair on the 5th and picked...
Liked On: 13-01-2024, 11:24 PM
Don't do what I did with the first one the damn cat brought in, pinned it to the wall with the diving handspear then got cute with the wife and made her deal with it for me while I tried not to...
Liked On: 13-01-2024, 08:05 PM
Ha, that reminds me of... The time me mate was heading home on his bike in the sticks out of Napier. Comes around the corner, sees oldmate possum wandering down the side of the road - no time to...
Liked On: 12-01-2024, 10:34 PM
Sounds like you need a velcro attached mesh brass catcher bag that velcro's over the ejection port and catches your empties...
Liked On: 12-01-2024, 10:01 PM
Be a high likelihood that the oring is a metric and that oring you tried is imperial hence the thicker section which is too tight. Try a metric oring that fits for outside diameter and it should be...
Liked On: 12-01-2024, 03:45 PM
Yeah the auto/manual thing is almost done and dusted - walk onto your average dealers lot and try and find a manual car (actual car, not a ute, SUV or van). They are rare as hens teeth and rocking...
Liked On: 12-01-2024, 09:58 AM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 12-01-2024, 09:42 AM
Be a high likelihood that the oring is a metric and that oring you tried is imperial hence the thicker section which is too tight. Try a metric oring that fits for outside diameter and it should be...
Liked On: 11-01-2024, 10:49 PM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 11-01-2024, 08:08 PM