You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 15-01-2024, 05:46 PM
Don't do what I did with the first one the damn cat brought in, pinned it to the wall with the diving handspear then got cute with the wife and made her deal with it for me while I tried not to...
Liked On: 13-01-2024, 11:25 PM
If you call them pests feel free to drop them off at mine, I'll assist with disposal... Been doing ok on the f**king rosellas this year so far, knocked off a breeding pair on the 5th and picked...
Liked On: 13-01-2024, 11:24 PM
Don't do what I did with the first one the damn cat brought in, pinned it to the wall with the diving handspear then got cute with the wife and made her deal with it for me while I tried not to...
Liked On: 13-01-2024, 08:05 PM
Ha, that reminds me of... The time me mate was heading home on his bike in the sticks out of Napier. Comes around the corner, sees oldmate possum wandering down the side of the road - no time to...
Liked On: 12-01-2024, 10:34 PM
Sounds like you need a velcro attached mesh brass catcher bag that velcro's over the ejection port and catches your empties...
Liked On: 12-01-2024, 10:01 PM
Be a high likelihood that the oring is a metric and that oring you tried is imperial hence the thicker section which is too tight. Try a metric oring that fits for outside diameter and it should be...
Liked On: 12-01-2024, 03:45 PM
Yeah the auto/manual thing is almost done and dusted - walk onto your average dealers lot and try and find a manual car (actual car, not a ute, SUV or van). They are rare as hens teeth and rocking...
Liked On: 12-01-2024, 09:58 AM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 12-01-2024, 09:42 AM
Be a high likelihood that the oring is a metric and that oring you tried is imperial hence the thicker section which is too tight. Try a metric oring that fits for outside diameter and it should be...
Liked On: 11-01-2024, 10:49 PM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 11-01-2024, 08:08 PM
You will likely find that with the 16p 3 blade on and four divers (bubblehead math - 4 divers = the same load as 6 people so for a 5.5m boat that's a lot of lardarse) the boat will feel sluggish and...
Liked On: 11-01-2024, 05:42 PM
Is it cavitating at all, ie getting air into the prop and reducing the friction on the water which allows the revs to rise? Cavitation is often thought of as a big lung full of air into the prop,...
Liked On: 11-01-2024, 11:38 AM
Being fit and proper isn't about being careful (to not get caught), it's about not being an f'wit and doing dumb stuff that shows you either don't think or have a general disregard for the finer...
Liked On: 11-01-2024, 11:06 AM
Being fit and proper isn't about being careful (to not get caught), it's about not being an f'wit and doing dumb stuff that shows you either don't think or have a general disregard for the finer...
Liked On: 11-01-2024, 10:45 AM