No.3
Member

1650 Likes

Page 36 of 110 First ... 222324252627282930313233343536373839404142434445464748495086 ... Last

• Jump to page:

1. 
   RUMPY liked post by No.3 On thread : Food Grade Oil For Knives

   I've always used a cold pressed olive oil, simply cause I have it. It seems OK, haven't had any issues from using it look at it that way. I left butter on a knife once, wasn't a planned thing but...

   Liked On: 12-11-2023, 08:43 PM

2. 
   blip liked post by No.3 On thread : Timattalon's MX5 woes

   Nah bruh, weld repair it in situ... Or with nothing to lose your other option is custom make a new key and modify the gear. Worth trying before ripping it out!

   Liked On: 12-11-2023, 04:07 PM

3. 
   timattalon liked post by No.3 On thread : Jupmstarting 18650's

   Yeah if they are the "protected" type of 18650 they have a circuit on the top that shuts the cell off over something like 4.25v or less than 3.3v from memory. Over the max, the cell will still...

   Liked On: 11-11-2023, 08:06 PM

4. 
   Finnwolf liked post by No.3 On thread : WTF Bubba

   I had a scan of an article on that process, there was one older lady at that particular armoury that did the straightness inspection on every barrel. Picked it up, held it up to a window with a...

   Liked On: 11-11-2023, 05:21 PM

5. 
   Micky Duck liked post by No.3 On thread : WTF Bubba

   I had a scan of an article on that process, there was one older lady at that particular armoury that did the straightness inspection on every barrel. Picked it up, held it up to a window with a...

   Liked On: 11-11-2023, 03:48 PM

6. 
   norsk liked post by No.3 On thread : WTF Bubba

   If you saw the technique the old timers who made Lee Enfield barrels used, you'd be quite shocked. They had a chunk of tree trunk, and they eyeballed the center of the bend and whapped the outside...

   Liked On: 10-11-2023, 09:25 PM

7. 
   SickShooter liked post by No.3 On thread : show us your chainsaws

   OMG. Chinese parts... Sorting out a MS360 at the mo, assumption that all would be somewhat OK in it considering where it came from - the engine runs mint and the rest of it is pretty good. A...

   Liked On: 07-11-2023, 07:14 PM

8. 
   outlander liked post by No.3 On thread : 1974 Tohatsu B18D outboards

   Three main causes - rooted pump or pump not operating efficiently (this could be due to the impellor worn/failed or mechanical issue with the pump componentry or intake or plumbing), blockage in the...

   Liked On: 07-11-2023, 03:53 PM

9. 
   tetawa liked post by No.3 On thread : Useing the firearms register

   It's not a laugh it's a complete clusterfluck. This should have been sorted out prior to 'go-live'...

   Liked On: 05-11-2023, 06:39 PM

10. 
    Maca49 liked post by No.3 On thread : Useing the firearms register

    It's not a laugh it's a complete clusterfluck. This should have been sorted out prior to 'go-live'...

    Liked On: 05-11-2023, 01:11 PM

11. 
    Maca49 liked post by No.3 On thread : Useing the firearms register

    Ha, that'll slow you down...

    Liked On: 05-11-2023, 01:09 PM

12. 
    rewa liked post by No.3 On thread : Useing the firearms register

    It's not a laugh it's a complete clusterfluck. This should have been sorted out prior to 'go-live'...

    Liked On: 05-11-2023, 11:34 AM

13. 
    Micky Duck liked post by No.3 On thread : 1974 Tohatsu B18D outboards

    Three main causes - rooted pump or pump not operating efficiently (this could be due to the impellor worn/failed or mechanical issue with the pump componentry or intake or plumbing), blockage in the...

    Liked On: 04-11-2023, 04:03 PM

14. 
    blip liked post by No.3 On thread : 1974 Tohatsu B18D outboards

    Three main causes - rooted pump or pump not operating efficiently (this could be due to the impellor worn/failed or mechanical issue with the pump componentry or intake or plumbing), blockage in the...

    Liked On: 04-11-2023, 10:26 AM

15. 
    outlander liked post by No.3 On thread : Useing the firearms register

    It's not a laugh it's a complete clusterfluck. This should have been sorted out prior to 'go-live'...

    Liked On: 02-11-2023, 02:39 PM

Page 36 of 110 First ... 222324252627282930313233343536373839404142434445464748495086 ... Last

• Jump to page: