No.3
Member

1600 Likes

Page 24 of 107 First ... 101112131415161718192021222324252627282930313233343536373874 ... Last

• Jump to page:

1. 
   Micky Duck liked post by No.3 On thread : Help with diagnosis

   "Stock came off". You've changed something, or the rifle is settling into a new normal in the stock. Did you alter the bedding in any way, or to put this the not PC way are you fairly...

   Liked On: 08-01-2024, 11:36 AM

2. 
   Marty Henry liked post by No.3 On thread : Wasps

   Fipronil is the active bit in Verspex, also some flea treatments like spot on. You can use it for wasps, but it needs to be in a bait station as sunlight and moisture stuffs it pronto. You want to...

   Liked On: 07-01-2024, 11:00 PM

3. 
   dannyb liked post by No.3 On thread : Help with diagnosis

   "Stock came off". You've changed something, or the rifle is settling into a new normal in the stock. Did you alter the bedding in any way, or to put this the not PC way are you fairly...

   Liked On: 07-01-2024, 09:33 PM

4. 
   Micky Duck liked post by No.3 On thread : .223 Subsonic

   Reducing slower powders below the posted safe lower limit is dangerous, for two reasons: One, the more powder available to be ignited by the primer flame the higher the pressure spike before the...

   Liked On: 07-01-2024, 07:07 PM

5. 
   Micky Duck liked post by No.3 On thread : .223 Subsonic

   Finishing rounds, or lower report (read virtually silent) for a niche use or on a specific property. There are reasons to make this interesting, one being the ban on rimfire and. 22 hornet on crown...

   Liked On: 07-01-2024, 07:06 PM

6. 
   Micky Duck liked post by No.3 On thread : .17 HMR blow up

   Yeesh, I would seriously consider sending a batch of that brass including the failed case away to go back to the manufacturer for analysis - unless we are talking the shortage of the early 1940's or...

   Liked On: 07-01-2024, 12:22 PM

7. 
   bobbydazzler liked post by No.3 On thread : .17 HMR blow up

   Yeesh, I would seriously consider sending a batch of that brass including the failed case away to go back to the manufacturer for analysis - unless we are talking the shortage of the early 1940's or...

   Liked On: 07-01-2024, 11:33 AM

8. 
   altair liked post by No.3 On thread : Rules for building your own ute deck?

   Have a look around for one that came off a similar model, how much is your time worth (even if you have to adjust the front angles and polish a few sharp corners...). Steel is dear at the mo, welding...

   Liked On: 07-01-2024, 10:17 AM

9. 
   Trout liked post by No.3 On thread : Bahco Knives

   George Henry

   Liked On: 04-01-2024, 01:11 PM

10. 
    Husky1600#2 liked post by No.3 On thread : Advice needed - Free Wheel Hubs

    I was thinking the last lot I replaced were a direct bolt on with their own spacer and everything required including gaskets. But didn't want to post that as it was a while ago and my memory being...

    Liked On: 02-01-2024, 08:56 PM

11. 
    Hugh Shields liked post by No.3 On thread : .17 HMR blow up

    Might be the best pest control round ever invented - there are other ways to kill pests that don't carry such a high level of risk IMO. Having seen the aftereffects of one of these .17 rimfire...

    Liked On: 02-01-2024, 08:26 PM

12. 
    Micky Duck liked post by No.3 On thread : Interesting clip on gun/public safety

    One issue that he didn't touch on, is that there is zero deterrent for people knowing that no one else is armed. They know that they can act with impunity without much chance of someone else...

    Liked On: 02-01-2024, 01:33 PM

13. 
    Micky Duck liked post by No.3 On thread : .223 Subsonic

    Yep, if you can find a very lightly constructed varmint bullet they often make very acceptable sub loads with quite good controlled expansion at the slower speeds. For a while we were using .218 Bee...

    Liked On: 02-01-2024, 01:26 PM

14. 
    40mm liked post by No.3 On thread : Interesting clip on gun/public safety

    One issue that he didn't touch on, is that there is zero deterrent for people knowing that no one else is armed. They know that they can act with impunity without much chance of someone else...

    Liked On: 02-01-2024, 12:59 PM

15. 
    Micky Duck liked post by No.3 On thread : .223 Subsonic

    You're right - the main issue with sub loads in anything is expansion. Effectively with .223 you are attempting to turn it into a .22 rimfire - this requires a bulky fast powder and one of the...

    Liked On: 02-01-2024, 12:02 PM

Page 24 of 107 First ... 101112131415161718192021222324252627282930313233343536373874 ... Last

• Jump to page: