No.3
Member

1601 Likes

Page 26 of 107 First ... 121314151617181920212223242526272829303132333435363738394076 ... Last

• Jump to page:

1. 
   Arced liked post by No.3 On thread : Ford Ranger Headlight Upgrade

   No. The PX1 had a different reflector and profile, the PX2 XLT and Wildtrack (first facelift front end) were slightly better and the best performing of the PX-series rangers. I think the same PX1...

   Liked On: 28-12-2023, 12:27 PM

2. 
   rupert liked post by No.3 On thread : CZ 527 Mauser Feed Issues.

   The extractor sounds like it's not clicking over the rim of the case correctly, camming the case to one side and binding the action up. Mauser's are notorious for this, the dreaded Mauser extractor...

   Liked On: 28-12-2023, 12:06 PM

3. 
   Growlybear liked post by No.3 On thread : hmmmmmmmmmmmmm

   It's been said for a long time, the numbers declared as confiscated/destroyed don't seem to stack up. If you look solely at SKS types, we imported them into NZ for near on 65 years give or take. ...

   Liked On: 28-12-2023, 08:33 AM

4. 
   makka liked post by No.3 On thread : WW1 SMLE with Winchester A5 build

   Be worthwhile asking as he's one of a dying breed unfortunately. If Andrew is able to sort a few older scopes he'd make a lot of guys happy.

   Liked On: 28-12-2023, 08:12 AM

5. 
   FRST liked post by No.3 On thread : WW1 SMLE with Winchester A5 build

   And BTW, bloody nice work on that rifle - even as a repro job that would be worth a bloody pretty penny.

   Liked On: 27-12-2023, 10:13 PM

6. 
   shananah liked post by No.3 On thread : She’s back

   They tell me that that's the 'right' orientation - it's when it is 90deg to the pistol grip or roughly parallel with the barrel that the amount of surface area of the growth lines/grain in the pistol...

   Liked On: 27-12-2023, 03:53 PM

7. 
   paremata liked post by No.3 On thread : 16" vs 22" barrel noise level

   It's not just the length of the barrel - a point that a lot of people miss. If you shoot and there is a bank to one side of you, you will experience more sound pressure than if it is entirely open...

   Liked On: 27-12-2023, 08:50 AM

8. 
   Gibo liked post by No.3 On thread : Broke my bolt

   Easy as. You only use the shoelace or string or paracord or whatever to take the firing pin spring pressure off then use your hand to twist the cocking piece to re-cock the bolt. I've done it...

   Liked On: 26-12-2023, 05:25 PM

9. 
   Alex_Z liked post by No.3 On thread : 16" vs 22" barrel noise level

   It's not just the length of the barrel - a point that a lot of people miss. If you shoot and there is a bank to one side of you, you will experience more sound pressure than if it is entirely open...

   Liked On: 25-12-2023, 05:33 PM

10. 
    crewe2 liked post by No.3 On thread : 16" vs 22" barrel noise level

    It's not just the length of the barrel - a point that a lot of people miss. If you shoot and there is a bank to one side of you, you will experience more sound pressure than if it is entirely open...

    Liked On: 25-12-2023, 11:43 AM

11. 
    ANTSMAN liked post by No.3 On thread : Berdan primed/crimped?

    Yep once the first time has been done and the remaining crimp removed it's all very easy. Some brass brands are virtually impossible to deprime manually, I have some very good ADI F4 ball here which...

    Liked On: 25-12-2023, 08:24 AM

12. 
    Trout liked post by No.3 On thread : 1997 R50 Series II Nissan Terrano Auto - 4WD Operation

    Wahoooo, yeah I just googled your listed spec there. It's a combo all right, what fun. I hope that it doesn't cock up on you - it will be expensive haha. But while it's working it will be pretty...

    Liked On: 25-12-2023, 06:44 AM

13. 
    7mmwsm liked post by No.3 On thread : Really tall thin gun safe

    1220x2400 sheet will give you a folded safe 400x400 by whatever tall you need. It's really easy to do hinges and frame, I can give you a drawing for it. Also, don't bother with tig for this job mig...

    Liked On: 25-12-2023, 06:18 AM

14. 
    akaroa1 liked post by No.3 On thread : Really tall thin gun safe

    1220x2400 sheet will give you a folded safe 400x400 by whatever tall you need. It's really easy to do hinges and frame, I can give you a drawing for it. Also, don't bother with tig for this job mig...

    Liked On: 25-12-2023, 05:24 AM

15. 
    Pepo1 liked post by No.3 On thread : 1997 R50 Series II Nissan Terrano Auto - 4WD Operation

    No, what you have is a little confusing but the two controls (knob and lever - to differ from the gearstick) do two distinctly different things. The lever is the easiest to manage first - it simply...

    Liked On: 24-12-2023, 08:09 PM

Page 26 of 107 First ... 121314151617181920212223242526272829303132333435363738394076 ... Last

• Jump to page: