Oli1102
Member

87 Likes

Page 4 of 6 First 123456 Last

• Jump to page:

1. 
   Bill999 liked post by Oli1102 On thread : Howa 1500 bolt knob options

   I haven’t got my bolt knob yet (ordering a Badger Ord. one from Brownells) but I threaded my handle in 5/16-24 the DIY way, using files and a die set. Came out really good, as I couldn’t find a...

   Liked On: 25-11-2019, 09:29 AM

2. 
   mopheadrob liked post by Oli1102 On thread : preferred brass brands

   I would same Norma or Lapua depending on the caliber. Federal, Winchester & Hornady all would be suitable for a short range or bush hunting load. I load Norma (stamped Geco) for my hunting rifle but...

   Liked On: 07-11-2019, 07:11 PM

3. 
   mopheadrob liked post by Oli1102 On thread : preferred brass brands

   Yeah some brands use harder brass or are manufactured thicker than others. For example Federal because of its softer nature will usually have loose primer pockets with moderate loads within 5 loads...

   Liked On: 07-11-2019, 07:09 PM

4. 
   Moa Hunter liked post by Oli1102 On thread : preferred brass brands

   Yeah some brands use harder brass or are manufactured thicker than others. For example Federal because of its softer nature will usually have loose primer pockets with moderate loads within 5 loads...

   Liked On: 07-11-2019, 10:52 AM

5. 
   Shootm liked post by Oli1102 On thread : When to anneal cases

   I anneal each firing, as it's just so quick and simple. I am using my own version of the 'Skips' annealer and have hooked the torch up to a 9Kg gas bottle making gas cost of little concern to me....

   Liked On: 07-09-2019, 03:14 PM

6. 
   winaa liked post by Oli1102 On thread : Priming Problems

   Glad you got it sorted! I was tossing up between Lyman and RCBS for hand priming, chose RCBS in the end. Either way, good to see customer support that actually solve the issue. Reloading brands have...

   Liked On: 06-08-2019, 08:04 AM

7. 
   10-Ring liked post by Oli1102 On thread : When to anneal cases

   I anneal each firing, as it's just so quick and simple. I am using my own version of the 'Skips' annealer and have hooked the torch up to a 9Kg gas bottle making gas cost of little concern to me....

   Liked On: 29-07-2019, 11:43 AM

8. 
   Steelisreal liked post by Oli1102 On thread : When to anneal cases

   I anneal each firing, as it's just so quick and simple. I am using my own version of the 'Skips' annealer and have hooked the torch up to a 9Kg gas bottle making gas cost of little concern to me....

   Liked On: 29-07-2019, 11:05 AM

9. 
   rewa liked post by Oli1102 On thread : Measuring COAL

   I measure base to ojive (CBTO). But also note down COAL in my records for comparing apples with apples with someone else’s loads. Every comparator insert is different...

   Liked On: 04-06-2019, 07:38 PM

10. 
    LBD liked post by Oli1102 On thread : DIY Annealing

    I have pretty much finished building my DIY machine, based of Skips design on YouTube. It has cost me about $180 with almost $100 of that being the propane torch and hose. I initially planned on...

    Liked On: 05-05-2019, 05:00 PM

11. 
    Cordite liked post by Oli1102 On thread : DIY Annealing

    I have pretty much finished building my DIY machine, based of Skips design on YouTube. It has cost me about $180 with almost $100 of that being the propane torch and hose. I initially planned on...

    Liked On: 28-04-2019, 04:38 PM

12. 
    10-Ring liked post by Oli1102 On thread : DIY Annealing

    I have pretty much finished building my DIY machine, based of Skips design on YouTube. It has cost me about $180 with almost $100 of that being the propane torch and hose. I initially planned on...

    Liked On: 28-04-2019, 02:37 PM

13. 
    dannyb liked post by Oli1102 On thread : Buying 270 brass

    I’m using GECO cases at the moment, from factory ammo I used to use. I expect my current batch to last a while, as I’m only on my 3rd loading and GECO is a RUAG company much like Norma (so I imagine...

    Liked On: 28-04-2019, 11:57 AM

14. 
    mopheadrob liked post by Oli1102 On thread : Closer... closer... CLOSER... (warning - long story!)

    Awesome story mate! I grew up in Auckland so hunting wasn’t hugely on my radar. Moved to Marlborough about 7 years and and in those 7 years got out hunting maybe 5 times, usually in a different area...

    Liked On: 30-03-2019, 07:13 PM

15. 
    dannyb liked post by Oli1102 On thread : ADI 4Kg Rifle Powders

    Yeah thats more what i was thinking, they can make more and store more 'units' in the 500g bottle. It's just really frustrating as buy 8x500g is easily an extra $100 compared to 1x4Kg...

    Liked On: 02-03-2019, 02:26 PM

Page 4 of 6 First 123456 Last

• Jump to page: