'There is precisely zero situations where a boar is going to sneak up on you and try and eat you.' That's just a silly thing to say...They will fuck you up if wounded or cornered. We investigated...
Liked On: 15-12-2020, 07:14 PM
My pump has ghost ring sights and in my experience with the Lyman slugs, 5" off bull @ 50 metres, would make me very happy. I also find that the Lyman slug is the least accurate of the three. Lee...
Liked On: 11-12-2020, 09:00 AM
I've been star crimping those slugs for years without a problem. Use AP70N and both WAA 12SL or WAA 12F114 wads.
Liked On: 06-12-2020, 08:51 PM
An easy question with a simple answer. It has to be a 25/303 in a Boyds stock.
Liked On: 30-11-2020, 08:08 PM
That's not to say that the burglar will be apprehended though, unless he's speeding of course.
Liked On: 19-11-2020, 04:55 PM
That's not to say that the burglar will be apprehended though, unless he's speeding of course.
Liked On: 19-11-2020, 03:16 PM
A Chinese knock off of the Yamaha. We used them off Cairns for years and never had a problem.
Liked On: 19-11-2020, 01:58 PM
A Chinese knock off of the Yamaha. We used them off Cairns for years and never had a problem.
Liked On: 19-11-2020, 01:50 PM
Just make sure that it's only your hat that get's removed. Some have been known to wear those assless chaps.
Liked On: 17-11-2020, 02:24 PM
Horsepower is not everything you know. I've had some of these machines speed past me at well over my safe travelling speed of 85kmh. Most have the highly modified unbaffled engines too and one can...
Liked On: 17-11-2020, 02:13 PM
Horsepower is not everything you know. I've had some of these machines speed past me at well over my safe travelling speed of 85kmh. Most have the highly modified unbaffled engines too and one can...
Liked On: 17-11-2020, 01:40 PM
Very minimalist as a Harley should be. If your thing is a Harley, then nicely done. Enjoy the fuck out of it.
Liked On: 17-11-2020, 11:59 AM
I once observed a police captain firing off a case of 7.62x39 at the range with a newly acquired target rifle. When asked why he was doing such a thing, he said that he always did it with a new...
Liked On: 16-11-2020, 11:04 AM
Pretty easy to do, I've done it many times on small calibres such as the 308. JB Weld the right side of the action up and angle grind out the left. Bolt successfully moved and sometimes, even more...
Liked On: 16-11-2020, 11:03 AM
Pretty easy to do, I've done it many times on small calibres such as the 308. JB Weld the right side of the action up and angle grind out the left. Bolt successfully moved and sometimes, even more...
Liked On: 16-11-2020, 10:29 AM