Pengy
Member

8091 Likes

Page 60 of 540 First ... 104647484950515253545556575859606162636465666768697071727374110160 ... Last

• Jump to page:

1. 
   Pengy liked post by Ranger 888 On thread : Near-Miss

   I worked/tramped/hunted for 40 years in Auckland's Waitakere Ranges (60,000 acres of dense jungle) and many times came across (just in time!) square vertical shafts of about 7-800 mm diameter, and...

   Liked On: 24-05-2023, 09:25 PM

2. 
   Pengy liked post by Rusky On thread : Near-Miss

   Technically not even considered a near hit as no objects or moving parts were involved, but more of an "accident" if you refer to NZ's HSWA 2015 definitions. ;)

   Liked On: 24-05-2023, 09:25 PM

3. 
   Pengy liked post by Rusky On thread : Near-Miss

   Inspired by 57jL post about his near death experience, I too had a close call in March this year with a hunting accident (call it a navigational slip-up if you like) that I thought I should share. ...

   Liked On: 24-05-2023, 09:23 PM

4. 
   Pengy liked post by Shearer On thread : Dinner thread?

   Tried the AMac Brazillian fish moqueca again tonight with Crayfish (instead of Stargazer). Bloody good again. 224638

   Liked On: 23-05-2023, 10:11 PM

5. 
   Pengy liked post by NIMROD On thread : Fires

   Hunting to me is about the environment I'm in. I love to roam with only a pack & rifle, in our bushlands and Mountain Ranges, keeping alive the old school "man alone' protocols and etiquettes. The...

   Liked On: 19-05-2023, 07:28 PM

6. 
   Pengy liked post by Barry the hunter On thread : Kahawai favorite uses

   yum when we were culling we got 3 months food in one hit - so 3 months in week of and 3 months again - we got tinned kahawai in a white sauce in oval cans - we made a fish pie with mashed potato on...

   Liked On: 18-05-2023, 09:08 PM

7. 
   Pengy liked post by davhope On thread : Generator issues

   How old is the stalling genetic? Has it been run unloaded or lightly loaded for a portion of its life? If your lucky you might be able to load bank test it for a couple of hours and get it...

   Liked On: 17-05-2023, 10:19 PM

8. 
   Pengy liked post by OPO On thread : Generator issues

   If that genny has previously sat around a bit it may well have old fuel-turned to gum in the carb jets, making the engine run lean . a lean engine will surge a bit then give up long before giving you...

   Liked On: 17-05-2023, 10:18 PM

9. 
   Pengy liked post by longshot On thread : Generator issues

   If it is already struggling at 50%, which would be 1200w, then doing the on-off trick to pre warm the elements is very unlikely to work for the 100%. The hunting and surging at 50% informs what...

   Liked On: 17-05-2023, 09:42 PM

10. 
    Pengy liked post by longshot On thread : Generator issues

    When you say the Generator packs a sad, what is the specific nature of the tantrum? Does it trip its breaker but the motor continues running?, or does the motor stall? Or does the generator just...

    Liked On: 17-05-2023, 08:58 PM

11. 
    Pengy liked post by XR500 On thread : Generator issues

    In defence of the cheap chinese generators I did get one and a half houses built with a 3kva 'blackout' labeled generator. Built an open sided tent for the builders a workbench inside and a...

    Liked On: 17-05-2023, 07:47 PM

12. 
    Pengy liked post by Maca49 On thread : Generator issues

    Honda or Dunlite are two good makes, sold heaps of the Hondas, they were assembled in NZ, coupled to an Italian alternator, no longer made, they were an open frame model. Your better with an...

    Liked On: 17-05-2023, 07:46 PM

13. 
    Pengy liked post by Maca49 On thread : Generator issues

    Pengy, by a 6kva good quality unit and walk away. Probably $3-$4k. Or find a good quality secondhand one.

    Liked On: 17-05-2023, 11:43 AM

14. 
    Pengy liked post by Snap 4T On thread : Generator issues

    I stuffed my inverter gen a year ago but the shop fixed it for me I was told I need to double up the req watt for loading up. E.g. 2.4KW heater, you need a 5kw inverter to be on the safe side.

    Liked On: 17-05-2023, 11:42 AM

15. 
    Pengy liked post by MCCPRO On thread : Generator issues

    A 2400w heater off a 3k geny will probably struggle due to the draw. 3 k is peak. If its a variable heater try turning down temp and see if it works. Sent from my SM-N970F using Tapatalk

    Liked On: 17-05-2023, 11:41 AM

Page 60 of 540 First ... 104647484950515253545556575859606162636465666768697071727374110160 ... Last

• Jump to page: