Yup, the boxes on top are the ball bearing drawers slides for another one too (another pending project which has been sitting there for a year or so). Slowly sorting out the organisation of the...
Liked On: 01-08-2022, 09:18 AM
I'm beginning the process of setting up a reloading room and the first step, I decided, was to set up base plates for all the equipment to increase the foot print of the equipment and provide a rigid...
Liked On: 01-08-2022, 09:16 AM
I've searched, and this comes up from time to time in the forums: Tyvek house wrap for a lightweight tent footprint or groundsheet for fly camping. Not the easiest stuff to find if you just want a...
Liked On: 29-07-2022, 10:49 PM
For those interested (I know it was difficult for me to find anyway), workshop innovations have Lapua brass in 284 Win now available. Cheers
Liked On: 18-07-2022, 04:34 PM
I've saved some of you guys' good advice which may be of use to OP, I was saving it as a guide for when I get into a 4WD Because there is interest in the subject a bit of copy and paste is easy...
Liked On: 18-07-2022, 09:24 AM
Had an amazing weekend up in the hills. Found this guy way way up the back an hour before dark, managed to stalk in from 700m to get within 320m. Put one in his shoulder and the rest is history!!...
Liked On: 17-07-2022, 10:32 PM
I wet tumbled a little over 1000 45acp cases last night, batched them according to numbers of reloads, one batch didn’t spend enough time drying in the dehydrator and then in the oven with the fan...
Liked On: 13-07-2022, 10:45 PM
Took my 223 , 6.5x55 and 300 WM out today for a try at the standing 100 yds, surprised myself although the 300 WM was low I new I was low when I touched off. Its a bit hard as all my rifles are high...
Liked On: 10-07-2022, 05:56 PM
100 yards standing .223 and the 6.5 Creedmoor didn't get to try out further.https://uploads.tapatalk-cdn.com/20220707/edbad5683633411304e435473d2672d1.jpg Sent from my CPH2145 using Tapatalk
Liked On: 10-07-2022, 05:54 PM
Interesting doco from Oz. https://youtu.be/RQGqx70bBxM
Liked On: 05-07-2022, 12:56 PM
I bent some 25mm steel tube for a motorbike into a tight U bend a number of years back. I flattened and folded over one end, packed the tube as full as possible with sand (like compress it in there...
Liked On: 04-07-2022, 10:24 PM
Greetings All, It dawned fine, clear and calm again in HB today so time for another crack at the challenge. Today the subject was my T3 6.5x55 shot sitting at 198 metres using my Pole Cat sticks. As...
Liked On: 03-07-2022, 01:37 PM
Took 5 rifles out for a dinner plate shoot this morning, weather perfect , no wind to speak of. I went to a spot i could get 400 yds but the trees have grown a bit so only managed 325 yds which for...
Liked On: 02-07-2022, 09:29 PM
Just seen this thread. I like this idea, its all good and well walking a shot onto a plate at LR, anyone can do that. But this is a true test of the cold bore first shot counts when in the field...
Liked On: 30-06-2022, 05:56 PM
The condition of your house is irrelevant if you're going to install the gun cabinet, rack etc in your unattached garage. Due to the current delays in Wellington it might pay for you to get your...
Liked On: 29-06-2022, 02:33 PM