r87mm
Member

96 Likes

Page 4 of 7 First 1234567 Last

• Jump to page:

1. 
   r87mm liked post by zimmer On thread : Load Development - Velocity vs Accuracy

   I've had factory ammo (on the very very rare occassion when I have bought some) give an ES of 27 fps. One of my goals with handloading is to exceed the performance of factory ammo. A 40 fps ES...

   Liked On: 06-02-2021, 09:53 AM

2. 
   r87mm liked post by R93 On thread : Load Development - Velocity vs Accuracy

   Can I ask what barrel and length you're running in your 06? If your not shooting past 500 have you considered going to a 130 like the scirocco or berger? I would be frustrated with a 40fps ES...

   Liked On: 06-02-2021, 08:45 AM

3. 
   r87mm liked post by Tahr On thread : For Muz. RIP

   This one is for Muz. Muz always followed my stories and adventures and often messaged me about what he was up to and what I was doing. So yesterday we had a working bee at the hut we are building....

   Liked On: 08-01-2021, 05:26 PM

4. 
   r87mm liked post by zimmer On thread : Help - Decapping road stuck in case

   Hornady's pathetic zip lock system. The shaft locks by friction. All other die manufacturers have threaded rods with threaded locking nuts or rings. On the Hornady there are are series of thread like...

   Liked On: 28-12-2020, 12:13 PM

5. 
   r87mm liked post by Ryan_Songhurst On thread : Keeping it Simple for New Handloaders

   I know several people who go all out getting really in depth with their reloading who couldn't shoot a good group if they tried anyhow. The number one thing that will improve your reloading...

   Liked On: 17-12-2020, 08:03 PM

6. 
   r87mm liked post by TARGEX On thread : Projectile manufacturing

   Mmm, that Bryn. The same one that is running a logging gang over Summer & does cabinet making & rifle stocks etc over winter as there will never be enough money or quantities required in nz to make a...

   Liked On: 01-12-2020, 07:30 PM

7. 
   r87mm liked post by Micky Duck On thread : Calibre / Velocity / Projectile vs Meat Wastage

   forget ALL about meat loss....think animal lost and it becomes irrelevant..... far better to kill it 3 times over than kill it just about enough and have it get away into spot you cant find...

   Liked On: 29-11-2020, 06:14 PM

8. 
   r87mm liked post by Cordite On thread : Lathe

   I had a broken tooth on my Grayson lathe's 25-teeth screw cutting change gear. I replaced it with a stick weld blob filed down. Tedious filing... and the weld proved tougher to file than the...

   Liked On: 14-11-2020, 03:13 PM

9. 
   r87mm liked post by timattalon On thread : Accuracy at 100 vs 600 (example). Variations in accuracy at different ranges

   My understanding of the lighter lower / heavier higher was as the barrel lifts in angle with recoil, the lighter bullet is out of the muzzle faster and the heavier one is in the barrel fractionally...

   Liked On: 01-11-2020, 01:31 PM

10. 
    r87mm liked post by Tahr On thread : The Grandboy

    School holidays, so I took the Grandboy out for am overnight camp over. We set our camp up at about 4pm and then headed off for hunt. 150983 It wasn't too long and Grandad spotted a young...

    Liked On: 09-10-2020, 07:16 PM

11. 
    r87mm liked post by hotbarrels On thread : Interesting rimfire models: your reviews, pics, comments

    I have a Thompson Center Hot Shot .22LR single shot. This is a miniaturised youth version of the Contender. Its a cool little gun that shoots well. The discontinued them in 2013. Not my photo...

    Liked On: 02-09-2020, 07:16 PM

12. 
    r87mm liked post by ebf On thread : Long Distance Shooting Course? Bay of Plenty

    I'm going to go out on a limb here and suggest that the chances of you having any lasting benefit from a "course" will be minimal. Long range shooting is about practice, practice, practice. ...

    Liked On: 25-08-2020, 08:22 PM

13. 
    r87mm liked post by Nugget connaisseur On thread : Needing a new scope.

    I'm 99% sure the e3200 have lifetime warranty. I sent my E4200 back after it did the same. New seals, re gassed it, all for 20 dollars freight. No need to provide receipt either. As mine was 2nd...

    Liked On: 24-08-2020, 08:00 PM

14. 
    r87mm liked post by ROKTOY On thread : Off-road e bike

    FIL recently sold his Cherokee Chief, he wasn't getting the economy this one seems to offer. It was good off-road though. 147406

    Liked On: 12-08-2020, 10:58 PM

15. 
    r87mm liked post by Stocky On thread : Doubtful river access

    I passed 12 people walking out last friday after a week in. Very busy at the moment. Also a ute was broken into and stolen about two weeks back in the carpack opposite the valley. There are lots of...

    Liked On: 09-08-2020, 08:46 PM

Page 4 of 7 First 1234567 Last

• Jump to page: