I use iSnipe. I have compared its answers to other apps over several years and it has been my experience that they all provide the same data so it comes down to personal preference of how user...
Liked On: 12-01-2021, 10:00 AM
definately a thing....if you develope a load in hot conditions it will be fine in cold....the otherway around can be dangerous.
Liked On: 11-01-2021, 07:24 PM
That was piss, serves you right for rolling in it Sent from my iPhone using Tapatalk
Liked On: 09-01-2021, 04:54 PM
Correct. And even quality cases like Lapua and Peterson have variation. My last lot of those 2 brands in 308 displayed around 0.3 thou variation albeit a very narrow band. One of the worst in the...
Liked On: 08-01-2021, 12:45 PM
Shot my seating depth ladder today in much calmer conditions, this was reflected in my shooting. All rounds were loaded at 62gn starting at my charge weight ladder length of 2.843" and working back...
Liked On: 20-12-2020, 05:49 PM
Well seems like it will work Micky Duck, feels rock solid compared to without, there is enough room to get the bullet in and there is enough travel in the stem to seat them where I need to. I'll...
Liked On: 20-12-2020, 10:48 AM
156487 I have one, amazing bit of kit
Liked On: 20-12-2020, 10:44 AM
I have 1. Got it from Rhinosport in Aussie. No problems getting it other that a long wait for permits, particularly the export permit out of Aussie. Sent from my SM-N975F using Tapatalk
Liked On: 19-12-2020, 01:28 PM
You always seem to offer a very objective evaluation of things, much appreciated
Liked On: 13-12-2020, 05:29 PM
Some brands of shell holders will accept 308 sized brass and 6.5x55. A few years ago I upgraded my shellholders and now use a RCBS #2 or a Redding E-Z #7 for the Swede. The Redding E-Z #7 will fit...
Liked On: 10-12-2020, 02:01 PM
Just be careful if FLSing so there is still bolt resistance. I used to always do it that way (could just feel resistance at the final point of closure) but now aim for 1 thou clearance ie no bolt...
Liked On: 10-12-2020, 12:10 PM
Sounds good mate, hope it works out. Mine is the Sportsman and it came with a 60HP 2 stroke Mercury. It was the display model at the Manfield fielddays a few years back so they had put a bigger...
Liked On: 10-12-2020, 09:23 AM
Normally I'd be a bit reluctant to chop bits off my boat, but as you probably know those rails don't do much except help a bit when your launching. they are way to low to help walk around the front...
Liked On: 09-12-2020, 08:37 PM
Nice Mclay :) have one myself As mentioned I wouldn't put it in the way of the anchor area incase you need to drop it. The ones I've seen on the fishing shows ( as mentioned) are mounted just off to...
Liked On: 08-12-2020, 08:05 PM
The reason they are usually offset is so when in the horizontal position they dont protrude any further forward than the bowsprit, but also so the anchor system is still able to be used if need be ...
Liked On: 08-12-2020, 07:38 PM