I use a few Wilson dies and arbor press, they are great for doing load development at the range. I’ve also used Mickey D trick with straight line dies if the run out is getting up, a...
Liked On: 11-02-2020, 04:04 PM
Here's my silly old bike...I'm a silly old man, so I guess it's a fitting bicycle.130376
Liked On: 11-02-2020, 01:14 PM
Funily enough I just bought the guide ir510 50mm ex demo for a good price too. Can't wait to get out and test it. I trialed it side by side with several other units and this appeared to give the...
Liked On: 08-02-2020, 04:28 PM
130078 A humble K31 to replace the SG 550 that was confiscated. According to Wiki the serial number indicates it being made of walnut. Opened the stock, there was no ownership detail unfortunately.
Liked On: 08-02-2020, 01:14 AM
I was given a sporterised LEC rifle, with original NZ marked receiver and bolt (matching numbers but the bolt has been re-numbered to match, assuming an arsenal job) that someone had fitted an SMLE...
Liked On: 07-02-2020, 02:08 AM
Earlier comments on NV might be a better direction than thermal given the cost limits. They can be dirt cheap these days and solve the "rabbits see the light and bolt" issue, though you don't get the...
Liked On: 06-02-2020, 01:23 PM
This makes me reminisce on the most interesting folly project ever, the 4.5mm MKR. Cold swaged solid copper bullets looking like extra-sharp SMKs shot out of necked down .22magnum curve taper...
Liked On: 04-02-2020, 03:10 AM
Lone Peak Fuzion 6.5 PRC This build has been together for a few months just got some pics from the owner after he had the barrel coated to match the action. Wicked build with a lot of cool...
Liked On: 03-02-2020, 05:33 PM
....I finally bit the bullet and joined. Based in South Canterbury at present, but originally from South Westland (the extra toe is hardly noticeable). I know Cowbow06 and StrikerNZ through...
Liked On: 29-01-2020, 01:53 AM
If its like everything Ridgeline I ever tried the zips will probably fall apart after about a week.
Liked On: 28-01-2020, 01:49 AM
Getting there.... pictures paint a thousand words. And ‘painting’ is literally what I’ve been doing! I’m real happy how the stain has worked out so far. Still lots more boiled linseed coats and...
Liked On: 20-01-2020, 07:00 AM
It's kind of embarrassing to relate in a forum full of accomplished hunters and some beginners with half a dozen deer racked up, that this is my first. Oh well, better late than never, I suppose. ...
Liked On: 19-01-2020, 07:49 AM
Got out for a day hunt south of town 25 min, taking the new M70 stainless in 308, -8deg crisp and misty, parked the truck, and set out to explore an area of regrowth, after logging a few years ago,...
Liked On: 17-01-2020, 02:19 AM
128179 New 7x57R barrel set for my fair double rifle, plus rail, rings and pad. If it wasn't -29deg, here in Alberta, I would go and sight in the scope.
Liked On: 14-01-2020, 01:26 PM
Well some pics of a rifle I have had for a while but only just got out of the safe and mounted a scope last year. Volquartson .22LR. Nice workmanship and shoots very well. I have one in .22 WMR with...
Liked On: 07-01-2020, 05:42 AM