Roarless20
Member

744 Likes

Page 18 of 50 First ... 4567891011121314151617181920212223242526272829303132 ... Last

• Jump to page:

1. 
   Roarless20 liked post by Jus On thread : Tops Hunting Tips

   Thought I was only one who does my travel in the pitch black haha good to know I’m not the only mad bastard!!

   Liked On: 25-08-2023, 07:32 PM

2. 
   Roarless20 liked post by akaroa1 On thread : Turning a chamber reamer into a live pilot

   I just thought this might be a project that might help someone else out. I re barreled one of my vintage rifles recently. Had it dialed up in the lathe to cut the chamber and realised it's bore...

   Liked On: 18-08-2023, 10:47 PM

3. 
   Roarless20 liked post by Norway On thread : Online shooting school: Summary

   This episode is basically a run-through of previous episode and my high-horse preaching... It's about rifle shooting and understanding ballistic principles, some of them advanced. ...

   Liked On: 18-08-2023, 05:36 PM

4. 
   Roarless20 liked post by flock On thread : Die TRedding locking rings.

   Tip Redding although being top of the line dies, provide a barbaric locking ring system, that will damage the thread of your dies. Solution insert a fine piece of shotgun shot into the thread then...

   Liked On: 18-08-2023, 05:11 PM

5. 
   Roarless20 liked post by Grey Kiwi On thread : Teslong bore scope

   Well...colour me impressed! Bought mine direct from Teslong (Aliexpress store), and it arrived this morning (11 days from Ali). It's the 45" flexible cable NTG100 jobbie. Once I turned on the OTG...

   Liked On: 17-08-2023, 08:18 PM

6. 
   Roarless20 liked post by Jaco Goosen On thread : Rifle bedding - is this normal?

   Thanks Bruce, I think my pricing is fair. I hope. Shooting is expensive as it is. Its more important to me to get more people out there shooting, doing the things we love.

   Liked On: 14-08-2023, 09:25 AM

7. 
   Roarless20 liked post by Kimber 7mm-08 On thread : Rifle bedding - is this normal?

   I'd like to get it back to near where I had it shooting. 200yds230938 200yds230939 200yds230936 440yds230940 3 shot 440yd gong230937

   Liked On: 14-08-2023, 09:23 AM

8. 
   Roarless20 liked post by Jaco Goosen On thread : Rifle bedding - is this normal?

   You cleaned it up real neatly. Good job. Im really interested in seeing how this gun groups. Would have been great if you could have tested it with good hand loads. What kind of accuracy are...

   Liked On: 14-08-2023, 09:22 AM

9. 
   Roarless20 liked post by 6.5 CRD On thread : Lapua 6.5 PRC Brass - Split Necks

   Mine definitely isnt a headspace issue, ive been bumping the shoulder back a thou. Basically all of my lapua brass is wrecked now, slowly but surely the ones that were ok are now buggered. All i can...

   Liked On: 10-08-2023, 01:55 PM

10. 
    Roarless20 liked post by 16Tontovarish On thread : Whats the longest shot youll confidently take at an animal

    If I can get a good prone position and the wind is ok I can confidently get a deer out to 400m. I target shoot further than that but ethically that's as far as I'll go on a live animal. From...

    Liked On: 10-08-2023, 10:36 AM

11. 
    Roarless20 liked post by johnd On thread : Hornady vs Nosler vs Norma brass.

    Personally I think Norma isn't all its cracked up to be. It's really soft and I don't think it takes high pressure well. It's probably very consistent in thickness etc but I stand by my original...

    Liked On: 09-08-2023, 08:09 PM

12. 
    Roarless20 liked post by STC On thread : friends asking how much for load development

    1k??? including 50 rounds and 4 range visits? and after thst 1$ per round? jesus youre cheap! calculate the time you will have to spend. and your hourly rate. including allowance to get to range...

    Liked On: 07-08-2023, 11:26 AM

13. 
    Roarless20 liked post by stug On thread : friends asking how much for load development

    Sections 22D and 22E of the arms act state what needs to be done to supply/sell ammunition. You just need a firearms licence not a dealers.

    Liked On: 07-08-2023, 11:26 AM

14. 
    Roarless20 liked post by TimC On thread : Rifle bedding - is this normal?

    The logic of the guys saying "as long as it shoots better then job done" so you'd be happy if you sent your car in for a wheel alignment, they dented a panel but you'd still be happy as long as the...

    Liked On: 06-08-2023, 09:09 PM

15. 
    Roarless20 liked post by Proudkiwi On thread : Rifle bedding - is this normal?

    It’s a bigger problem now though for the OP than just a rubbish looking bedding job. He was trying to address issues relating to accuracy and rightly decided to try bedding. Now, in my opinion, he...

    Liked On: 05-08-2023, 12:39 PM

Page 18 of 50 First ... 4567891011121314151617181920212223242526272829303132 ... Last

• Jump to page: