Can I get the 1 bazillion like button
Liked On: 02-08-2015, 08:14 AM
Riser mounts are shit. Get a real scope mount and be done with it. It will look better and work better.
Liked On: 18-07-2015, 12:26 PM
A good rule of thumb is that NcStar is shit, but for the riser if you replace the bolts with real steel bolts rather than pot metal it will be ok. I would still recommend the better gun works...
Liked On: 18-07-2015, 10:09 AM
Measuring accuracy in moa to 4 decimal places with a 3 shot group is hilarious
Liked On: 12-07-2015, 08:48 AM
Fantastic. You are not mounting these heads Linyera? Sent from my GT-I8160L using Tapatalk
Liked On: 11-07-2015, 10:40 AM
Ha Ha says the 6.5 AI owner pushing 50 grain rabbit poohs at 2200fps :P
Liked On: 26-06-2015, 08:46 AM
And made better.
Liked On: 26-06-2015, 08:45 AM
I use a 62s with the Garmin Topo4 maps works well, also had a Plain 62 before it which I found much simpler to use. Will probably sell it soon and upgrade to the Rino.
Liked On: 13-06-2015, 12:00 AM
you will go a long way to beat the garmin rino. Simple as to use I have never lost signal You wont be disappointed
Liked On: 12-06-2015, 04:26 PM
37052
Liked On: 31-05-2015, 10:07 AM
Too high for sure. Go see gunworks and get some Talley rings to suit. It's good gear needs good mounts.
Liked On: 30-05-2015, 11:39 PM
Sounds like you got lucky. Could have been no deer had you not seen it get up
Liked On: 27-05-2015, 09:20 PM
Sigh..... that's what ya get....... wouldn't have happened with a Model 70 Winchester......:P
Liked On: 08-05-2015, 08:31 AM
If you'd got that sako and optilocks you'd be hunting this weekend[emoji2] Sent from my iPhone using Tapatalk
Liked On: 08-05-2015, 08:30 AM
ok this is what works for me 170 grn speer round nose for in the bush/or a 150 partition now 130 grn ballistic tip for out in open MY rifle puts the 1" high and 3" high at 100 yards and MY RIFLE...
Liked On: 06-05-2015, 10:18 PM