True about availability of ammo for a 22-204, however the shoulder on a 204 is further forward and at a different angle to a 222 Mag. It would be more of a 222 Mag Improved.
Liked On: 21-11-2018, 11:41 PM
Had a few days down south, couple days doing a bit of small game hunting, stopped at 50 rabbits the first evening with 60 shots, one double witch was a bit surprising, as didn't think the 20gr v-max...
Liked On: 21-11-2018, 08:12 PM
Its funny how the 222 magnum bombed only to come back in a tighter top and be everyones darling. I think a 1:9 or 8 twist 22 250 will be where I go, thanks of for the info rossi.45
Liked On: 21-11-2018, 01:57 PM
I hate seating dies with grimp built in i much prefer backing the seating die off till it doesn’t crimp then I just run the rounds though a Dedicated crimp die the lee factory crimp dose an awesome...
Liked On: 19-11-2018, 09:40 AM
I got it to the stage where it shoots 40gr great at 3150fps but curiosity got the best of me this morning. The .22 TCM reamer I ordered just had the std length free bore for the pistol cambering so...
Liked On: 15-11-2018, 10:22 PM
I was hoping that Tankd and/or Ryan would have posted some examples of Ladder Testing where ladder nodes were conclusively found, and that knowing this had resulted in optimising a load for better...
Liked On: 10-11-2018, 06:59 PM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 10-11-2018, 06:19 AM
Lovely looking country their Rossi, an arvo on the bunnies is an arvo well spent. Good stuff.
Liked On: 10-11-2018, 03:45 AM
Been working on this for The last few weeks. A 6.5 Grendel on a Howa mini action. Made it for my 7 & 11 years old boys to go hunting with. Tuned the trigger, cut the bolt shroud in half, reprofiled...
Liked On: 09-11-2018, 09:00 PM
So I decided to leave the Brno 465 Hornet alone after checking out the magazine for TCM. The 465s shorter action and forward mounted ejector compared to the Brno .222 and CZ 527 is an advantage for...
Liked On: 09-11-2018, 08:34 AM
Good morning, This week is a muzzle brake on a winchester XPR re barreled in 6.5-06 Ackley Improved 98310
Liked On: 07-11-2018, 11:32 AM
Good Morning, This week is a barrel fluting job on a Remington 700 5R in 308 97778 97779
Liked On: 07-11-2018, 11:32 AM
Here is a ladder I did for my 6.5 Grendel last week. I used 5 widely spaced powder weights and two sorts of primers. 98287 98288 Here are plots of the points of impact of the 5 shots...
Liked On: 07-11-2018, 08:08 AM
With the exception of shooters whose passion is target, or benchrest, etc is there any advantage in doing this, or playing with seating depth, neck tension and a whole host of other things if you are...
Liked On: 05-11-2018, 10:50 AM
Stained and back together ,I didn't spent to long on it as it's a working rifle and I don't mind a gun that show's it dents and bruises's ...history. Not a great photo, late afternoon sun and camera...
Liked On: 05-11-2018, 06:54 AM