rossi.45
Member

2095 Likes

Page 133 of 140 First ... 3383119120121122123124125126127128129130131132133134135136137138139140 Last

• Jump to page:

1. 
   gadgetman liked post by rossi.45 On thread : 7-08 or 308

   or load down . . . less speed is less recoil my reduced load i made up for my son in .308W is a gem . .. 150grn. Sierra ProHunter at 2345fps, 1100lbs of energy still on hand at 300yds, accurate...

   Liked On: 20-07-2016, 05:47 PM

2. 
   7mmsaum liked post by rossi.45 On thread : 7-08 or 308

   or load down . . . less speed is less recoil my reduced load i made up for my son in .308W is a gem . .. 150grn. Sierra ProHunter at 2345fps, 1100lbs of energy still on hand at 300yds, accurate...

   Liked On: 18-07-2016, 05:38 PM

3. 
   Gibo liked post by rossi.45 On thread : 7-08 or 308

   or load down . . . less speed is less recoil my reduced load i made up for my son in .308W is a gem . .. 150grn. Sierra ProHunter at 2345fps, 1100lbs of energy still on hand at 300yds, accurate...

   Liked On: 18-07-2016, 03:15 PM

4. 
   veitnamcam liked post by rossi.45 On thread : Show me your knives

   51882 made this from a bearing back in the day when i did a little blacksmithin . . good little handy knife

   Liked On: 10-07-2016, 07:39 PM

5. 
   gadgetman liked post by rossi.45 On thread : Show me your knives

   51882 made this from a bearing back in the day when i did a little blacksmithin . . good little handy knife

   Liked On: 10-07-2016, 04:09 PM

6. 
   kiwijames liked post by rossi.45 On thread : Show me your knives

   51882 made this from a bearing back in the day when i did a little blacksmithin . . good little handy knife

   Liked On: 09-07-2016, 08:43 AM

7. 
   Dougie liked post by rossi.45 On thread : Show me your knives

   51882 made this from a bearing back in the day when i did a little blacksmithin . . good little handy knife

   Liked On: 09-07-2016, 04:07 AM

8. 
   Tahr liked post by rossi.45 On thread : Show me your knives

   51882 made this from a bearing back in the day when i did a little blacksmithin . . good little handy knife

   Liked On: 07-07-2016, 08:07 PM

9. 
   sometimes liked post by rossi.45 On thread : Show me your knives

   51882 made this from a bearing back in the day when i did a little blacksmithin . . good little handy knife

   Liked On: 07-07-2016, 07:07 PM

10. 
    Cartman liked post by rossi.45 On thread : 338 fed.

    if this is any help . . my subsonic load was zeroed at 50yds which gave me a 100yd zero for my high speed load . . dialups using Strelok got me out to 400yds with subs before i ran out of elevation...

    Liked On: 03-07-2016, 11:12 AM

11. 
    300_BLK liked post by rossi.45 On thread : 22 Magnum Killing Power?

    it is one of those rimfire cartridges you either like or you don't . . i tried to like it, twice, first with a very accurate CZ American and later a heavy barrel for my sako quad that was a tack...

    Liked On: 07-06-2016, 05:20 PM

12. 
    Shearer liked post by rossi.45 On thread : 22 Magnum Killing Power?

    it is one of those rimfire cartridges you either like or you don't . . i tried to like it, twice, first with a very accurate CZ American and later a heavy barrel for my sako quad that was a tack...

    Liked On: 07-06-2016, 11:16 AM

13. 
    Ryan_Songhurst liked post by rossi.45 On thread : Scope options / advice

    i wouldn't get a balistic reticle . . dialing is better with a fine crosshair .. to me

    Liked On: 27-05-2016, 12:24 AM

14. 
    7mmsaum liked post by rossi.45 On thread : Scope options / advice

    i wouldn't get a balistic reticle . . dialing is better with a fine crosshair .. to me

    Liked On: 26-05-2016, 11:18 PM

15. 
    Mathias liked post by rossi.45 On thread : Autumn goat hunting

    tough to beat cooked on a coal range . .. get it nice and hot, quick fry up in the cooker with some onions, throw in some curry n veg, slow cook for the day in the oven for an amazing casserole...

    Liked On: 23-05-2016, 01:26 PM

Page 133 of 140 First ... 3383119120121122123124125126127128129130131132133134135136137138139140 Last

• Jump to page: