RugerM77
Member

158 Likes

Page 1 of 11 1234567891011 Last

• Jump to page:

1. 
   JoelA liked post by RugerM77 On thread : Velocity loss in short barrel 308

   JoelA. I shoot a 16" with supressor but do reload et al. The max range shot I'll take is at 300 metres. That said; I have used factory ammo in several different brands of shortened .308's. The...

   Liked On: 15-04-2024, 09:37 AM

2. 
   11mms liked post by RugerM77 On thread : How to prepare and eat possum?

   Very, very good tucker. A possum eats the best. Took my daughter in to the Urewera for a gap year some years ago. Before TUT. We stayed almost a year, eating possum on average, about four times a...

   Liked On: 28-11-2023, 09:20 AM

3. 
   Micky Duck liked post by RugerM77 On thread : How to prepare and eat possum?

   Very, very good tucker. A possum eats the best. Took my daughter in to the Urewera for a gap year some years ago. Before TUT. We stayed almost a year, eating possum on average, about four times a...

   Liked On: 23-11-2023, 06:52 PM

4. 
   hunt08 liked post by RugerM77 On thread : Ribbon markers

   Same

   Liked On: 02-09-2023, 04:51 PM

5. 
   camenzie liked post by RugerM77 On thread : Change of Address requirements

   Same here

   Liked On: 01-09-2023, 08:12 PM

6. 
   taking_the_gun_for_a_walk liked post by RugerM77 On thread : .308 ammunition advice

   The last three .308's I've worked with recently all shot Sako gameheads at or under MOA. They also shot fed Blue Box and Rem Coreloct at near to MOA. IMO stick to the Gameheads in the short term,...

   Liked On: 27-08-2023, 08:56 AM

7. 
   grandpamac liked post by RugerM77 On thread : .308 ammunition advice

   The last three .308's I've worked with recently all shot Sako gameheads at or under MOA. They also shot fed Blue Box and Rem Coreloct at near to MOA. IMO stick to the Gameheads in the short term,...

   Liked On: 26-08-2023, 04:40 PM

8. 
   Williamfga liked post by RugerM77 On thread : .308 ammunition advice

   The last three .308's I've worked with recently all shot Sako gameheads at or under MOA. They also shot fed Blue Box and Rem Coreloct at near to MOA. IMO stick to the Gameheads in the short term,...

   Liked On: 26-08-2023, 04:22 PM

9. 
   Moa Hunter liked post by RugerM77 On thread : Snapper jigs?

   21 to 28 gram, so that's roughly 3/4 ounce to full ounce. Those weights will work all year round in Northland. Two things differ though to the standard lure presentation that a lot of us use up here....

   Liked On: 01-08-2023, 07:36 PM

10. 
    MB liked post by RugerM77 On thread : Snapper jigs?

    Yeah, you're quite right. I had a senior moment. Seems to happen more often now. After posting I went into the shed and checked, thought you dumb arse. I use Berkley too.

    Liked On: 01-08-2023, 07:30 PM

11. 
    Shearer liked post by RugerM77 On thread : Snapper jigs?

    Yeah, you're quite right. I had a senior moment. Seems to happen more often now. After posting I went into the shed and checked, thought you dumb arse. I use Berkley too.

    Liked On: 01-08-2023, 11:35 AM

12. 
    buzzman liked post by RugerM77 On thread : Primer question

    In terms of your first question: I've tried but found the primers to be a bit loose when seating in another case. Second question: Probably not, but give it a go and let us know.

    Liked On: 05-07-2023, 02:30 AM

13. 
    zimmer liked post by RugerM77 On thread : Primer question

    In terms of your first question: I've tried but found the primers to be a bit loose when seating in another case. Second question: Probably not, but give it a go and let us know.

    Liked On: 04-07-2023, 09:04 PM

14. 
    Northkiwi liked post by RugerM77 On thread : WHEN THINGs GO WRONG AND YOU END UP PUTTING YOUR LIFE ON THE LINE

    In relation to finding the OP's gear I went to the horses mouth. Had a yarn with the chief pilot, know him reasonably well. He was flying HS's machine when searching. To give everyone a rough idea of...

    Liked On: 23-06-2023, 10:09 PM

15. 
    dannyb liked post by RugerM77 On thread : Bullet seating depths

    Depending on your supply of components, 3 thou or 5 thou increments. Cortana suggested 3 thou.

    Liked On: 13-06-2023, 11:10 AM

Page 1 of 11 1234567891011 Last

• Jump to page: